[PATCH 1/4] ARM: dts: sun8i: Extend Orange Pi PC dt to also handle the PC Plus

Maxime Ripard maxime.ripard at free-electrons.com
Wed Jul 13 01:45:05 PDT 2016


On Sat, Jul 09, 2016 at 10:21:55PM +0200, Hans de Goede wrote:
> There is a new Orange Pi PC Plus available now, rather then adding
> yet another dts file for this variant, extend the existing
> Orange Pi PC to support the sdio wifi and emmc found on this variant.
> 
> Downside of this approach is the following messages in dmesg when run
> on the non Plus Orange Pi PC:
> 
> sunxi-mmc 1c10000.mmc: fatal err update clk timeout
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
> sunxi-mmc 1c11000.mmc: smc 2 err, cmd 1, RTO !!
> 
> Note these are completely harmless and there is no adverse effect
> to the functioning of the non Plus Orange Pi PC.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 40 +++++++++++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> index b8340f7..f9bf260 100644
> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
> @@ -49,11 +49,13 @@
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
>  / {
> -	model = "Xunlong Orange Pi PC";
> +	model = "Xunlong Orange Pi PC / PC Plus";
>  	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
>  
>  	aliases {
>  		serial0 = &uart0;
> +		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
> +		ethernet1 = &rtl8189ftv;
>  	};
>  
>  	chosen {
> @@ -118,6 +120,42 @@
>  	status = "okay";
>  };
>  
> +/* Note only present on orangepi pc *plus* */
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins_a>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	non-removable;
> +	status = "okay";
> +
> +	/*
> +	 * Explicitly define the sdio device, so that we can add an ethernet
> +	 * alias for it (which e.g. makes u-boot set a mac-address).
> +	 */
> +	rtl8189ftv: sdio_wifi at 1 {
> +		reg = <1>;
> +	};
> +};

Nothing prevents you from including the orange pi pc dts, from the
orange pi plus dts.

It prevents the duplication you were trying to avoid, and it doesn't
create all those spurious errors and devices.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160713/eb497b96/attachment.sig>


More information about the linux-arm-kernel mailing list