[v5 PATCH 3/5] phy: Add USB Type-C PHY driver for rk3399
Chris Zhong
zyw at rock-chips.com
Tue Jul 12 08:09:46 PDT 2016
Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
Type-C PHY is designed to support the USB3 and DP applications. The
PHY basically has two main components: USB3 and DisplyPort. USB3
operates in SuperSpeed mode and the DP can operate at RBR, HBR and
HBR2 data rates.
Signed-off-by: Chris Zhong <zyw at rock-chips.com>
Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---
Changes in v5:
- support get property from extcon
- remove PIN ASSIGN A/B support
Changes in v4:
- select EXTCON
- use phy framework to control the USB3 and DP function
- rename PIN_MAP_ to PIN_ASSIGN_
Changes in v3:
- remove the phy framework(Kishon Vijay Abraham I)
- add parentheses around the macro
- use a single space between type and name
- add spaces after opening and before closing braces.
- use u16 for register value
- remove type-c phy header file
- CodingStyle optimization
- use some cable extcon to get type-c port information
- add a extcon to notify Display Port
Changes in v2:
- select RESET_CONTROLLER
- alphabetic order
- modify some spelling mistakes
- make mode cleaner
- use bool for enable/disable
- check all of the return value
- return a better err number
- use more readx_poll_timeout()
- clk_disable_unprepare(tcphy->clk_ref);
- remove unuse functions, rockchip_typec_phy_power_on/off
- remove unnecessary typecast from void *
- use dts node to distinguish between phys.
Changes in v1:
- update the licence note
- init core clock to 50MHz
- use extcon API
- remove unused global
- add some comments for magic num
- change usleep_range(1000, 2000) tousleep_range(1000, 1050)
- remove __func__ from dev_err
- return err number when get clk failed
- remove ADDR_ADJ define
- use devm_clk_get(&pdev->dev, "tcpdcore")
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-typec.c | 974 +++++++++++++++++++++++++++++++++++++++
3 files changed, 984 insertions(+)
create mode 100644 drivers/phy/phy-rockchip-typec.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..83706a5 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -351,6 +351,15 @@ config PHY_ROCKCHIP_DP
help
Enable this to support the Rockchip Display Port PHY.
+config PHY_ROCKCHIP_TYPEC
+ tristate "Rockchip TYPEC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select EXTCON
+ select GENERIC_PHY
+ select RESET_CONTROLLER
+ help
+ Enable this to support the Rockchip USB TYPEC PHY.
+
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..91fa413 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000..348f9b9
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,974 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw at rock-chips.com>
+ * Kever Yang <kever.yang at rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP (0x21 << 2)
+#define CMN_SSM_BIAS (0x22 << 2)
+#define CMN_PLLSM0_PLLEN (0x29 << 2)
+#define CMN_PLLSM0_PLLPRE (0x2a << 2)
+#define CMN_PLLSM0_PLLVREF (0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK (0x2c << 2)
+#define CMN_PLLSM1_PLLEN (0x31 << 2)
+#define CMN_PLLSM1_PLLPRE (0x32 << 2)
+#define CMN_PLLSM1_PLLVREF (0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK (0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2)
+#define CMN_ICAL_OVRD (0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT (0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER (0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2)
+#define CMN_PLL0_INTDIV (0x94 << 2)
+#define CMN_PLL0_FRACDIV (0x95 << 2)
+#define CMN_PLL0_HIGH_THR (0x96 << 2)
+#define CMN_PLL0_DSM_DIAG (0x97 << 2)
+#define CMN_PLL0_SS_CTRL1 (0x98 << 2)
+#define CMN_PLL0_SS_CTRL2 (0x99 << 2)
+#define CMN_PLL1_VCOCAL_START (0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2)
+#define CMN_PLL1_INTDIV (0xb4 << 2)
+#define CMN_PLL1_FRACDIV (0xb5 << 2)
+#define CMN_PLL1_HIGH_THR (0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG (0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1 (0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2 (0xb9 << 2)
+#define CMN_RXCAL_OVRD (0xd1 << 2)
+#define CMN_TXPUCAL_CTRL (0xe0 << 2)
+#define CMN_TXPUCAL_OVRD (0xe1 << 2)
+#define CMN_TXPDCAL_OVRD (0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1 (0x5020 << 2)
+#define TX_ANA_CTRL_REG_2 (0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL (0x5022 << 2)
+#define TX_DIG_CTRL_REG_2 (0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA (0x5025 << 2)
+#define TX_ANA_CTRL_REG_3 (0x5026 << 2)
+#define TX_ANA_CTRL_REG_4 (0x5027 << 2)
+#define TX_ANA_CTRL_REG_5 (0x5029 << 2)
+
+#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2)
+#define RX_SDCAL0_OVRD (0x8041 << 2)
+#define RX_SDCAL1_OVRD (0x8049 << 2)
+#define RX_SLC_INIT (0x806d << 2)
+#define RX_SLC_RUN (0x806e << 2)
+#define RX_CDRLF_CNFG2 (0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD (0x8101 << 2)
+#define RX_SLC_IOP1_OVRD (0x8105 << 2)
+#define RX_SLC_QOP0_OVRD (0x8109 << 2)
+#define RX_SLC_QOP1_OVRD (0x810d << 2)
+#define RX_SLC_EOP0_OVRD (0x8111 << 2)
+#define RX_SLC_EOP1_OVRD (0x8115 << 2)
+#define RX_SLC_ION0_OVRD (0x8119 << 2)
+#define RX_SLC_ION1_OVRD (0x811d << 2)
+#define RX_SLC_QON0_OVRD (0x8121 << 2)
+#define RX_SLC_QON1_OVRD (0x8125 << 2)
+#define RX_SLC_EON0_OVRD (0x8129 << 2)
+#define RX_SLC_EON1_OVRD (0x812d << 2)
+#define RX_SLC_IEP0_OVRD (0x8131 << 2)
+#define RX_SLC_IEP1_OVRD (0x8135 << 2)
+#define RX_SLC_QEP0_OVRD (0x8139 << 2)
+#define RX_SLC_QEP1_OVRD (0x813d << 2)
+#define RX_SLC_EEP0_OVRD (0x8141 << 2)
+#define RX_SLC_EEP1_OVRD (0x8145 << 2)
+#define RX_SLC_IEN0_OVRD (0x8149 << 2)
+#define RX_SLC_IEN1_OVRD (0x814d << 2)
+#define RX_SLC_QEN0_OVRD (0x8151 << 2)
+#define RX_SLC_QEN1_OVRD (0x8155 << 2)
+#define RX_SLC_EEN0_OVRD (0x8159 << 2)
+#define RX_SLC_EEN1_OVRD (0x815d << 2)
+#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY (0x81e1 << 2)
+
+#define PMA_LANE_CFG (0xc000 << 2)
+#define PIPE_CMN_CTRL1 (0xc001 << 2)
+#define PIPE_CMN_CTRL2 (0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1 (0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2 (0xc004 << 2)
+#define PIPE_RCV_DET_INH (0xc005 << 2)
+#define DP_MODE_CTL (0xc008 << 2)
+#define DP_CLK_CTL (0xc009 << 2)
+#define STS (0xc00F << 2)
+#define PHY_ISO_CMN_CTRL (0xc010 << 2)
+#define PHY_DP_TX_CTL (0xc408 << 2)
+#define PMA_CMN_CTRL1 (0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2)
+#define PHY_ISOLATION_CTRL (0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2)
+
+#define CLK0_PLL_MASK 0x3
+#define PLL0_DIV1 0
+#define CLK1_PLL_MASK 0x30
+#define PLL1_DIV2 0x30
+
+#define CMN_READY BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE BIT(2)
+#define DP_PLL_ENABLE BIT(0)
+#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8))
+
+#define GRF_SOC_CON26 0x6268
+#define UPHY_DP_SEL BIT(3)
+#define UPHY_DP_SEL_MASK BIT(19)
+#define DPTX_HPD_SEL (3 << 12)
+#define DPTX_HPD_DEL (2 << 12)
+#define DPTX_HPD_SEL_MASK (3 << 28)
+
+#define PHY_MODE_SET_TIMEOUT 1000000
+
+#define PIN_ASSIGN_A BIT(0)
+#define PIN_ASSIGN_B BIT(1)
+#define PIN_ASSIGN_C BIT(2)
+#define PIN_ASSIGN_D BIT(3)
+#define PIN_ASSIGN_E BIT(4)
+#define PIN_ASSIGN_F BIT(5)
+
+#define MODE_DISCONNECT 0
+#define MODE_UFP_USB BIT(0)
+#define MODE_DFP_USB BIT(1)
+#define MODE_DFP_DP BIT(2)
+
+struct usb3phy_reg {
+ u32 offset;
+ u32 enable_bit;
+ u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+ struct usb3phy_reg typec_conn_dir;
+ struct usb3phy_reg usb3tousb2_en;
+ struct usb3phy_reg external_psm;
+ struct usb3phy_reg pipe_status;
+ struct usb3phy_reg uphy_dp_sel;
+};
+
+struct rockchip_typec_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct extcon_dev *extcon;
+ struct phy *phy;
+ struct regmap *grf_regs;
+ struct clk *clk_core;
+ struct clk *clk_ref;
+ struct reset_control *uphy_rst;
+ struct reset_control *pipe_rst;
+ struct reset_control *tcphy_rst;
+ struct rockchip_usb3phy_port_cfg port_cfgs;
+
+ bool flip;
+ u8 mode;
+ u8 pin_assign;
+};
+
+struct phy_reg {
+ u16 value;
+ u32 addr;
+};
+
+struct phy_reg usb_pll_cfg[] = {
+ { 0xf0, CMN_PLL0_VCOCAL_INIT },
+ { 0x18, CMN_PLL0_VCOCAL_ITER },
+ { 0xd0, CMN_PLL0_INTDIV },
+ { 0x4a4a, CMN_PLL0_FRACDIV },
+ { 0x34, CMN_PLL0_HIGH_THR },
+ { 0x1ee, CMN_PLL0_SS_CTRL1 },
+ { 0x7f03, CMN_PLL0_SS_CTRL2 },
+ { 0x20, CMN_PLL0_DSM_DIAG },
+ { 0, CMN_DIAG_PLL0_OVRD },
+ { 0, CMN_DIAG_PLL0_FBH_OVRD },
+ { 0, CMN_DIAG_PLL0_FBL_OVRD },
+ { 0x7, CMN_DIAG_PLL0_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL0_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL0_LF_PROG },
+};
+
+struct phy_reg dp_pll_cfg[] = {
+ { 0xf0, CMN_PLL1_VCOCAL_INIT },
+ { 0x18, CMN_PLL1_VCOCAL_ITER },
+ { 0x30b9, CMN_PLL1_VCOCAL_START },
+ { 0x21c, CMN_PLL1_INTDIV },
+ { 0, CMN_PLL1_FRACDIV },
+ { 0x5, CMN_PLL1_HIGH_THR },
+ { 0x35, CMN_PLL1_SS_CTRL1 },
+ { 0x7f1e, CMN_PLL1_SS_CTRL2 },
+ { 0x20, CMN_PLL1_DSM_DIAG },
+ { 0, CMN_PLLSM1_USER_DEF_CTRL },
+ { 0, CMN_DIAG_PLL1_OVRD },
+ { 0, CMN_DIAG_PLL1_FBH_OVRD },
+ { 0, CMN_DIAG_PLL1_FBL_OVRD },
+ { 0x6, CMN_DIAG_PLL1_V2I_TUNE },
+ { 0x45, CMN_DIAG_PLL1_CP_TUNE },
+ { 0x8, CMN_DIAG_PLL1_LF_PROG },
+ { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 },
+ { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 },
+ { 0x4, CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy,
+ u32 num_lanes)
+{
+ u32 i;
+
+ /*
+ * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+ * cmn_psm_clk_dig_div = 2, set the clk division to 2
+ */
+ writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+ for (i = 0; i < num_lanes; i++) {
+ /*
+ * The following PHY configuration assumes a 24 MHz reference
+ * clock.
+ */
+ writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+ writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+ writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+ }
+}
+
+static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy)
+{
+ u16 rdata;
+ u32 i;
+
+ /*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1.
+ */
+ rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+ rdata &= ~CLK0_PLL_MASK;
+ rdata |= PLL0_DIV1;
+ writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+
+ /* load the configuration of PLL0 */
+ for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++)
+ writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+ u16 rdata;
+ u32 i;
+
+ /* set the default mode to RBR */
+ writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+ tcphy->base + DP_CLK_CTL);
+
+ /*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 1: PLL 1 div 2.
+ */
+ rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+ rdata &= ~CLK1_PLL_MASK;
+ rdata |= PLL1_DIV2;
+ writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+
+ /* load the configuration of PLL1 */
+ for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+ writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
+ u32 lane)
+{
+ writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+ writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy,
+ u32 lane)
+{
+ writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+ writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+ writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+ writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+ writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+ writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+ writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+ writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+ writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy,
+ u32 lane)
+{
+ u16 rdata;
+
+ writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+ writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+ writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+ writel(0x98, tcphy->base + TX_PSC_A2(lane));
+ writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+ writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+ writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+ writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+ writel(0x700, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+ rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+ rdata = (rdata & 0x8fff) | 0x6000;
+ writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static void tcphy_cfg_pin_assign(struct rockchip_typec_phy *tcphy)
+{
+ switch (tcphy->pin_assign) {
+ case PIN_ASSIGN_A:
+ writel(0x19d5, tcphy->base + PMA_LANE_CFG);
+ break;
+ case PIN_ASSIGN_B:
+ writel(0x1500, tcphy->base + PMA_LANE_CFG);
+ break;
+ case PIN_ASSIGN_C:
+ case PIN_ASSIGN_E:
+ writel(0x51d9, tcphy->base + PMA_LANE_CFG);
+ break;
+ case PIN_ASSIGN_D:
+ case PIN_ASSIGN_F:
+ writel(0x5100, tcphy->base + PMA_LANE_CFG);
+ break;
+ };
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+ const struct usb3phy_reg *reg, bool en)
+{
+ u32 mask = 1 << reg->write_enable;
+ u32 val = en << reg->enable_bit;
+
+ return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_lanes_config(struct rockchip_typec_phy *tcphy)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ u32 i;
+
+ property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+ tcphy_cfg_24m(tcphy, 0x4);
+
+ switch (tcphy->mode) {
+ case MODE_UFP_USB:
+ case MODE_DFP_USB:
+ tcphy_cfg_usb_pll(tcphy);
+ tcphy_cfg_dp_pll(tcphy);
+ if (tcphy->flip) {
+ tcphy_tx_usb_cfg_lane(tcphy, 3);
+ tcphy_rx_usb_cfg_lane(tcphy, 2);
+ } else {
+ tcphy_tx_usb_cfg_lane(tcphy, 0);
+ tcphy_rx_usb_cfg_lane(tcphy, 1);
+ }
+ break;
+ case MODE_DFP_DP:
+ tcphy_cfg_dp_pll(tcphy);
+ for (i = 0; i < 4; i++)
+ tcphy_dp_cfg_lane(tcphy, i);
+ break;
+ case MODE_DFP_USB | MODE_DFP_DP:
+ tcphy_cfg_usb_pll(tcphy);
+ tcphy_cfg_dp_pll(tcphy);
+ if (tcphy->flip) {
+ tcphy_tx_usb_cfg_lane(tcphy, 3);
+ tcphy_rx_usb_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 0);
+ tcphy_dp_cfg_lane(tcphy, 1);
+ } else {
+ tcphy_tx_usb_cfg_lane(tcphy, 0);
+ tcphy_rx_usb_cfg_lane(tcphy, 1);
+ tcphy_dp_cfg_lane(tcphy, 2);
+ tcphy_dp_cfg_lane(tcphy, 3);
+ }
+ break;
+ }
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+ u16 rdata, rdata2, val;
+
+ /* disable txda_cal_latch_en for rewrite the calibration values */
+ rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ val = rdata & 0xdfff;
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+ * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+ * works.
+ */
+ rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ rdata = rdata & 0xffc0;
+
+ rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+ rdata2 = rdata2 & 0x3f;
+
+ val = rdata | rdata2;
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+ usleep_range(1000, 1050);
+
+ /*
+ * Enable signal for latch that sample and holds calibration values.
+ * Activate this signal for 1 clock cycle to sample new calibration
+ * values.
+ */
+ rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+ val = rdata | 0x2000;
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+ usleep_range(150, 200);
+
+ /* set TX Voltage Level and TX Deemphasis to 0 */
+ writel(0, tcphy->base + PHY_DP_TX_CTL);
+ /* re-enable decap */
+ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+ writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+ /*
+ * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+ * voltage 16'h1001 for DP-AUX-TX and RX
+ */
+ writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+ /* re-enables Bandgap reference for LDO */
+ writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+ writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ /*
+ * re-enables the transmitter pre-driver, driver data selection MUX,
+ * and receiver detect circuits.
+ */
+ writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+ writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+ /*
+ * BIT 12: Controls auxda_polarity, which selects the polarity of the
+ * xcvr:
+ * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+ * down aux_m)
+ * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+ * aux_p)
+ */
+ val = 0xa078;
+ if (!tcphy->flip)
+ val |= BIT(12);
+ writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+ writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+ /*
+ * Controls low_power_swing_en, set the voltage swing of the driver
+ * to 400mv. The values below are peak to peak (differential) values.
+ */
+ writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+ writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+ /* Controls tx_high_z_tm_en */
+ val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+ val |= BIT(15);
+ writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static void tcphy_usb3_init(struct rockchip_typec_phy *tcphy)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ const struct usb3phy_reg *reg = &cfg->pipe_status;
+ int timeout;
+ unsigned int val;
+
+ /* wait TCPHY for pipe ready */
+ for (timeout = 0; timeout < 100; timeout++) {
+ regmap_read(tcphy->grf_regs, reg->offset, &val);
+ if (!(val & BIT(reg->enable_bit)))
+ return;
+ usleep_range(10, 20);
+ }
+
+ dev_err(tcphy->dev, "wait pipe ready timeout!\n");
+}
+
+static int tcphy_dp_init(struct rockchip_typec_phy *tcphy)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ u16 val;
+ int ret;
+
+ property_enable(tcphy, &cfg->uphy_dp_sel, 1);
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & BIT(6), 1000, PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "failed to wait TCPHY for DP ready\n");
+ return ret;
+ }
+
+ tcphy_dp_aux_calibration(tcphy);
+
+ if (tcphy->mode & MODE_DFP_USB)
+ writel(0xc101, tcphy->base + DP_MODE_CTL);
+ else
+ writel(0x0101, tcphy->base + DP_MODE_CTL);
+
+ ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+ val, val & BIT(4), 1000, PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ u32 val;
+ int ret;
+
+ ret = clk_prepare_enable(tcphy->clk_core);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+ return ret;
+ }
+
+ ret = clk_set_rate(tcphy->clk_core, 50000000);
+ if (ret) {
+ dev_err(tcphy->dev, "set type-c phy core clk rate failed\n");
+ goto err_clk_core;
+ }
+
+ ret = clk_prepare_enable(tcphy->clk_ref);
+ if (ret) {
+ dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+ goto err_clk_core;
+ }
+
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+
+ /* select external psm clock */
+ property_enable(tcphy, &cfg->external_psm, 1);
+ property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+ reset_control_deassert(tcphy->tcphy_rst);
+
+ tcphy_lanes_config(tcphy);
+
+ tcphy_cfg_pin_assign(tcphy);
+
+ if (tcphy->mode & MODE_DFP_DP) {
+ if (tcphy->mode & MODE_DFP_USB)
+ writel(0xc104, tcphy->base + DP_MODE_CTL);
+ else
+ writel(0x0104, tcphy->base + DP_MODE_CTL);
+ }
+
+ reset_control_deassert(tcphy->uphy_rst);
+
+ ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+ val, val & CMN_READY, 10,
+ PHY_MODE_SET_TIMEOUT);
+ if (ret < 0) {
+ dev_err(tcphy->dev, "wait pma ready timeout\n");
+ goto timeout_pma_ready;
+ }
+
+ reset_control_deassert(tcphy->pipe_rst);
+
+ return 0;
+
+timeout_pma_ready:
+ clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+ clk_disable_unprepare(tcphy->clk_core);
+ return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+ clk_disable_unprepare(tcphy->clk_core);
+ clk_disable_unprepare(tcphy->clk_ref);
+ reset_control_assert(tcphy->tcphy_rst);
+ reset_control_assert(tcphy->uphy_rst);
+ reset_control_assert(tcphy->pipe_rst);
+}
+
+static int rockchip_typec_phy_power_on(struct phy *_phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(_phy);
+ struct extcon_dev *edev = tcphy->extcon;
+ bool plugged, dfp, ufp, dp;
+ union extcon_property_value property;
+ int ret, id;
+ u8 mode;
+
+ ufp = extcon_get_cable_state_(edev, EXTCON_USB);
+ dfp = extcon_get_cable_state_(edev, EXTCON_USB_HOST);
+ dp = extcon_get_cable_state_(edev, EXTCON_DISP_DP);
+
+ plugged = ufp | dfp | dp;
+
+ if (!plugged) {
+ dev_err(tcphy->dev, "Nothing plugged in\n");
+ return -EINVAL;
+ }
+
+ if (ufp) {
+ mode = MODE_UFP_USB;
+ id = EXTCON_USB;
+ } else if (dfp && !dp) {
+ mode = MODE_DFP_USB;
+ id = EXTCON_USB_HOST;
+ } else if (dfp && dp) {
+ mode = MODE_DFP_USB | MODE_DFP_DP;
+ tcphy->pin_assign = PIN_ASSIGN_D;
+ id = EXTCON_DISP_DP;
+ } else {
+ mode = MODE_DFP_DP;
+ tcphy->pin_assign = PIN_ASSIGN_C;
+ id = EXTCON_DISP_DP;
+ }
+
+ ret = extcon_get_cable_property(edev, id, EXTCON_PROP_TYPEC_POLARITY,
+ &property);
+ if (ret) {
+ dev_err(tcphy->dev, "get property failed\n");
+ return ret;
+ }
+
+ tcphy->flip = property.intval ? 1 : 0;
+
+ if (tcphy->mode == mode)
+ return 0;
+
+ tcphy->mode = mode;
+
+ regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+ DPTX_HPD_SEL_MASK | DPTX_HPD_DEL);
+
+ ret = tcphy_phy_init(tcphy);
+ if (ret)
+ return ret;
+
+ if (mode & (MODE_UFP_USB | MODE_DFP_USB))
+ tcphy_usb3_init(tcphy);
+
+ if (mode & MODE_DFP_DP) {
+ ret = tcphy_dp_init(tcphy);
+ if (ret)
+ return ret;
+
+ regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
+ DPTX_HPD_SEL_MASK | DPTX_HPD_SEL);
+ }
+
+ return 0;
+}
+
+static int rockchip_typec_phy_power_off(struct phy *_phy)
+{
+ struct rockchip_typec_phy *tcphy = phy_get_drvdata(_phy);
+
+ tcphy_phy_deinit(tcphy);
+ tcphy->mode = MODE_DISCONNECT;
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_tcphy_ops = {
+ .power_on = rockchip_typec_phy_power_on,
+ .power_off = rockchip_typec_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int tcphy_get_param(struct device *dev,
+ struct usb3phy_reg *reg,
+ const char *name)
+{
+ u32 buffer[3];
+ int ret;
+
+ ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
+ if (ret) {
+ dev_err(dev, "Can not parse %s\n", name);
+ return ret;
+ }
+
+ reg->offset = buffer[0];
+ reg->enable_bit = buffer[1];
+ reg->write_enable = buffer[2];
+ return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+ struct device *dev)
+{
+ struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+ int ret;
+
+ ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+ "rockchip,typec-conn-dir");
+ if (ret) {
+ dev_err(dev, "could not find rockchip,typec-conn-dir node\n");
+ return ret;
+ }
+
+ ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+ "rockchip,usb3tousb2-en");
+ if (ret) {
+ dev_err(dev, "could not find rockchip,usb3tousb2-en node\n");
+ return ret;
+ }
+
+ ret = tcphy_get_param(dev, &cfg->external_psm,
+ "rockchip,external-psm");
+ if (ret) {
+ dev_err(dev, "could not find rockchip,external-psm node\n");
+ return ret;
+ }
+
+ ret = tcphy_get_param(dev, &cfg->pipe_status,
+ "rockchip,pipe-status");
+ if (ret) {
+ dev_err(dev, "could not find rockchip,pipe-status node\n");
+ return ret;
+ }
+
+ ret = tcphy_get_param(dev, &cfg->uphy_dp_sel,
+ "rockchip,uphy-dp-sel");
+ if (ret) {
+ dev_err(dev, "could not find rockchip,uphy-dp-sel node\n");
+ return ret;
+ }
+
+ tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,grf");
+ if (IS_ERR(tcphy->grf_regs)) {
+ dev_err(dev, "could not find grf dt node\n");
+ return PTR_ERR(tcphy->grf_regs);
+ }
+
+ tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+ if (IS_ERR(tcphy->clk_core)) {
+ dev_err(dev, "could not get uphy core clock\n");
+ return PTR_ERR(tcphy->clk_core);
+ }
+
+ tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+ if (IS_ERR(tcphy->clk_ref)) {
+ dev_err(dev, "could not get uphy ref clock\n");
+ return PTR_ERR(tcphy->clk_ref);
+ }
+
+ tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+ if (IS_ERR(tcphy->uphy_rst)) {
+ dev_err(dev, "no uphy_rst reset control found\n");
+ return PTR_ERR(tcphy->uphy_rst);
+ }
+
+ tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+ if (IS_ERR(tcphy->pipe_rst)) {
+ dev_err(dev, "no pipe_rst reset control found\n");
+ return PTR_ERR(tcphy->pipe_rst);
+ }
+
+ tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+ if (IS_ERR(tcphy->tcphy_rst)) {
+ dev_err(dev, "no tcphy_rst reset control found\n");
+ return PTR_ERR(tcphy->tcphy_rst);
+ }
+
+ return 0;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rockchip_typec_phy *tcphy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ int ret;
+
+ tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+ if (!tcphy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tcphy->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(tcphy->base)) {
+ dev_err(dev, "failed to remap phy regs\n");
+ return PTR_ERR(tcphy->base);
+ }
+
+ ret = tcphy_parse_dt(tcphy, dev);
+ if (ret)
+ return ret;
+
+ tcphy->dev = dev;
+ platform_set_drvdata(pdev, tcphy);
+
+ tcphy->mode = MODE_DISCONNECT;
+
+ tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+ if (IS_ERR(tcphy->extcon)) {
+ if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+ dev_err(dev, "Invalid or missing extcon\n");
+ return PTR_ERR(tcphy->extcon);
+ }
+
+ tcphy->phy = devm_phy_create(dev, NULL, &rockchip_tcphy_ops);
+ if (IS_ERR(tcphy->phy)) {
+ dev_err(dev, "failed to create Tepy-C phy\n");
+ return PTR_ERR(tcphy->phy);
+ }
+
+ phy_set_drvdata(tcphy->phy, tcphy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "Failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3399-typec-phy" },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+ .probe = rockchip_typec_phy_probe,
+ .driver = {
+ .name = "rockchip-typec-phy",
+ .of_match_table = rockchip_typec_phy_dt_ids,
+ },
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw at rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang at rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
--
2.6.3
More information about the linux-arm-kernel
mailing list