[PATCH V2 08/15] mmc: sdhci: add standard hw auto retuning support
Dong Aisheng
aisheng.dong at nxp.com
Tue Jul 12 00:46:17 PDT 2016
If HW supports SDHCI_TUNING_MODE_3 which is auto retuning, we won't
retune during runtime suspend and resume, instead we use Re-tuning
Request signaled via SDHCI_INT_RETUNE interrupt to do retuning and
hw auto retuning during data transfer to guarantee the signal sample
window correction.
This can avoid a mass of repeatedly retuning during small file system
data access and improve the performance.
Signed-off-by: Dong Aisheng <aisheng.dong at nxp.com>
---
drivers/mmc/host/sdhci.c | 15 ++++++++++++---
drivers/mmc/host/sdhci.h | 3 +++
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7894652b9929..31c14b0ff8e2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -229,6 +229,10 @@ static void sdhci_init(struct sdhci_host *host, int soft)
SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
SDHCI_INT_RESPONSE;
+ if (host->tuning_mode == SDHCI_TUNING_MODE_2 ||
+ host->tuning_mode == SDHCI_TUNING_MODE_3)
+ host->ier |= SDHCI_INT_RETUNE;
+
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
@@ -2673,6 +2677,9 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
pr_err("%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
+ if (intmask & SDHCI_INT_RETUNE)
+ mmc_retune_needed(host->mmc);
+
if (intmask & SDHCI_INT_CARD_INT) {
sdhci_enable_sdio_irq_nolock(host, false);
host->thread_isr |= SDHCI_INT_CARD_INT;
@@ -2682,7 +2689,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
- SDHCI_INT_CARD_INT);
+ SDHCI_INT_RETUNE | SDHCI_INT_CARD_INT);
if (intmask) {
unexpected |= intmask;
@@ -2787,7 +2794,8 @@ int sdhci_suspend_host(struct sdhci_host *host)
sdhci_disable_card_detection(host);
mmc_retune_timer_stop(host->mmc);
- mmc_retune_needed(host->mmc);
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
if (!device_may_wakeup(mmc_dev(host->mmc))) {
host->ier = 0;
@@ -2848,7 +2856,8 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host)
unsigned long flags;
mmc_retune_timer_stop(host->mmc);
- mmc_retune_needed(host->mmc);
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
spin_lock_irqsave(&host->lock, flags);
host->ier &= SDHCI_INT_CARD_INT;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e241e11a90d0..0411c9f36461 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -128,6 +128,7 @@
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
+#define SDHCI_INT_RETUNE 0x00001000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
#define SDHCI_INT_CRC 0x00020000
@@ -518,6 +519,8 @@ struct sdhci_host {
unsigned int tuning_count; /* Timer count for re-tuning */
unsigned int tuning_mode; /* Re-tuning mode supported by host */
#define SDHCI_TUNING_MODE_1 0
+#define SDHCI_TUNING_MODE_2 1
+#define SDHCI_TUNING_MODE_3 2
unsigned long private[0] ____cacheline_aligned;
};
--
1.9.1
More information about the linux-arm-kernel
mailing list