[PATCH v3 6/7] spi: s3c64xx: restore removed comments

[Andi Shyti]

Patch a9e93e8 has erroneously removed some comments which are
important to understand why the bus frequency is multiplied by
two during the spi transfer.

Reword the previous comment to a more appropriate message.

Suggested-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
Signed-off-by: Andi Shyti <andi.shyti at samsung.com>
Reviewed-by: Michael Turquette <mturquette at baylibre.com>
---
Hi,

despite Mike's comments I'm sending the patch as it was
originally meant. I think that fixing the exact clk where to set
the rate should anyway go in a different patch.

V2->V3
The comment has been reworded as Sylwester recommended.

Thanks,
Andi

 drivers/spi/spi-s3c64xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6da663f..5bedafc 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -639,6 +639,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
 	if (sdd->port_conf->clk_from_cmu) {
+		/* The src_clk clock is divided internally by 2 */
 		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
 	} else {
 		/* Configure Clock */
-- 
2.8.1