[PATCH 04/11] mfd: db8500 stop passing around platform data

Lee Jones lee.jones at linaro.org
Mon Jul 11 09:48:12 PDT 2016


On Tue, 05 Jul 2016, Linus Walleij wrote:

> From: Arnd Bergmann <arnd at arndb.de>
> 
> Except for the constant DB8500_PRCMU_FW_VERSION_OFFSET number, nothing
> is ever passed through the platform data and used in a driver, so we
> can simply stop passing it around.
> 
> Cc: Lee Jones <lee.jones at linaro.org>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> Hi Lee, Arnd probably wants to pull this in for v4.8 so your
> ACK would be appreciated so it can be funneled through ARM SoC.
> I don't think it could possibly collide with anything in your
> tree: I checked with git log on these files in linux-next
> and it seems clear.
> ---
>  arch/arm/mach-ux500/cpu-db8500.c          | 17 ++--------------
>  arch/arm/mach-ux500/setup.h               |  1 -
>  drivers/mfd/ab8500-core.c                 |  4 ----
>  drivers/mfd/ab8500-sysctrl.c              | 34 -------------------------------
>  drivers/mfd/db8500-prcmu.c                | 10 +++------
>  include/linux/mfd/abx500/ab8500-sysctrl.h |  6 ------
>  include/linux/mfd/dbx500-prcmu.h          | 10 ---------
>  7 files changed, 5 insertions(+), 77 deletions(-)

Without review (because I trust you both to do the right thing):

  Acked-by: Lee Jones <lee.jones at linaro.org>
  
> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
> index c015ef8dd535..bbd1b4b8d441 100644
> --- a/arch/arm/mach-ux500/cpu-db8500.c
> +++ b/arch/arm/mach-ux500/cpu-db8500.c
> @@ -16,8 +16,6 @@
>  #include <linux/irq.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
> -#include <linux/mfd/abx500/ab8500.h>
> -#include <linux/mfd/dbx500-prcmu.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/perf/arm_pmu.h>
> @@ -32,15 +30,6 @@
>  #include "db8500-regs.h"
>  #include "id.h"
>  
> -static struct ab8500_platform_data ab8500_platdata = {
> -};
> -
> -static struct prcmu_pdata db8500_prcmu_pdata = {
> -	.ab_platdata	= &ab8500_platdata,
> -	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
> -	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
> -};
> -
>  static void __init u8500_map_io(void)
>  {
>  	debug_ll_io_init();
> @@ -109,8 +98,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
>  	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
>  		       "ux500-msp-i2s.3", &msp3_platform_data),
>  	/* Requires non-DT:able platform data. */
> -	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
> -			&db8500_prcmu_pdata),
> +	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
>  	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
>  	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
>  	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
> @@ -119,8 +107,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
>  };
>  
>  static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
> -	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
> -			&db8500_prcmu_pdata),
> +	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
>  	{},
>  };
>  
> diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
> index c704254ab67c..e606847c8b58 100644
> --- a/arch/arm/mach-ux500/setup.h
> +++ b/arch/arm/mach-ux500/setup.h
> @@ -13,7 +13,6 @@
>  
>  #include <asm/mach/arch.h>
>  #include <linux/init.h>
> -#include <linux/mfd/abx500/ab8500.h>
>  
>  void ux500_restart(enum reboot_mode mode, const char *cmd);
>  
> diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
> index f3d689176fc2..589eebfc13df 100644
> --- a/drivers/mfd/ab8500-core.c
> +++ b/drivers/mfd/ab8500-core.c
> @@ -1087,7 +1087,6 @@ static int ab8500_probe(struct platform_device *pdev)
>  		"Vbus Detect (USB)",
>  		"USB ID Detect",
>  		"UART Factory Mode Detect"};
> -	struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
>  	const struct platform_device_id *platid = platform_get_device_id(pdev);
>  	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
>  	struct device_node *np = pdev->dev.of_node;
> @@ -1219,9 +1218,6 @@ static int ab8500_probe(struct platform_device *pdev)
>  		pr_cont("None\n");
>  	}
>  
> -	if (plat && plat->init)
> -		plat->init(ab8500);
> -
>  	if (is_ab9540(ab8500)) {
>  		ret = get_register_interruptible(ab8500, AB8500_CHARGER,
>  			AB8500_CH_USBCH_STAT1_REG, &value);
> diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
> index b9f0010309f9..207cc497958a 100644
> --- a/drivers/mfd/ab8500-sysctrl.c
> +++ b/drivers/mfd/ab8500-sysctrl.c
> @@ -127,45 +127,11 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
>  
>  static int ab8500_sysctrl_probe(struct platform_device *pdev)
>  {
> -	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
> -	struct ab8500_platform_data *plat;
> -	struct ab8500_sysctrl_platform_data *pdata;
> -
> -	plat = dev_get_platdata(pdev->dev.parent);
> -
> -	if (!plat)
> -		return -EINVAL;
> -
>  	sysctrl_dev = &pdev->dev;
>  
>  	if (!pm_power_off)
>  		pm_power_off = ab8500_power_off;
>  
> -	pdata = plat->sysctrl;
> -	if (pdata) {
> -		int last, ret, i, j;
> -
> -		if (is_ab8505(ab8500))
> -			last = AB8500_SYSCLKREQ4RFCLKBUF;
> -		else
> -			last = AB8500_SYSCLKREQ8RFCLKBUF;
> -
> -		for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
> -			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
> -			ret = ab8500_sysctrl_write(i, 0xff,
> -					pdata->initial_req_buf_config[j]);
> -			dev_dbg(&pdev->dev,
> -					"Setting SysClkReq%dRfClkBuf 0x%X\n",
> -					j + 1,
> -					pdata->initial_req_buf_config[j]);
> -			if (ret < 0) {
> -				dev_err(&pdev->dev,
> -					"Can't set sysClkReq%dRfClkBuf: %d\n",
> -					j + 1, ret);
> -			}
> -		}
> -	}
> -
>  	return 0;
>  }
>  
> diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
> index c0a86aeb1733..388e268b9bcf 100644
> --- a/drivers/mfd/db8500-prcmu.c
> +++ b/drivers/mfd/db8500-prcmu.c
> @@ -3094,8 +3094,7 @@ static void db8500_prcmu_update_cpufreq(void)
>  	}
>  }
>  
> -static int db8500_prcmu_register_ab8500(struct device *parent,
> -					struct ab8500_platform_data *pdata)
> +static int db8500_prcmu_register_ab8500(struct device *parent)
>  {
>  	struct device_node *np;
>  	struct resource ab8500_resource;
> @@ -3103,8 +3102,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
>  		.name = "ab8500-core",
>  		.of_compatible = "stericsson,ab8500",
>  		.id = AB8500_VERSION_AB8500,
> -		.platform_data = pdata,
> -		.pdata_size = sizeof(struct ab8500_platform_data),
>  		.resources = &ab8500_resource,
>  		.num_resources = 1,
>  	};
> @@ -3133,7 +3130,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
>  static int db8500_prcmu_probe(struct platform_device *pdev)
>  {
>  	struct device_node *np = pdev->dev.of_node;
> -	struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
>  	int irq = 0, err = 0;
>  	struct resource *res;
>  
> @@ -3149,7 +3145,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
>  	init_prcm_registers();
> -	dbx500_fw_version_init(pdev, pdata->version_offset);
> +	dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET);
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
>  	if (!res) {
>  		dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
> @@ -3204,7 +3200,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata);
> +	err = db8500_prcmu_register_ab8500(&pdev->dev);
>  	if (err) {
>  		mfd_remove_devices(&pdev->dev);
>  		pr_err("prcmu: Failed to add ab8500 subdevice\n");
> diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
> index 689312745b2f..01024d1aed0e 100644
> --- a/include/linux/mfd/abx500/ab8500-sysctrl.h
> +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
> @@ -37,12 +37,6 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
>  	return ab8500_sysctrl_write(reg, bits, 0);
>  }
>  
> -/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */
> -struct ab8500_sysctrl_platform_data {
> -	u8 initial_req_buf_config[8];
> -	u16 (*reboot_reason_code)(const char *cmd);
> -};
> -
>  /* Registers */
>  #define AB8500_TURNONSTATUS		0x100
>  #define AB8500_RESETSTATUS		0x101
> diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
> index bf5109d38a26..5d374601404c 100644
> --- a/include/linux/mfd/dbx500-prcmu.h
> +++ b/include/linux/mfd/dbx500-prcmu.h
> @@ -178,16 +178,6 @@ enum ddr_pwrst {
>  
>  #define DB8500_PRCMU_LEGACY_OFFSET		0xDD4
>  
> -struct prcmu_pdata
> -{
> -	bool enable_set_ddr_opp;
> -	bool enable_ape_opp_100_voltage;
> -	struct ab8500_platform_data *ab_platdata;
> -	u32 version_offset;
> -	u32 legacy_offset;
> -	u32 adt_offset;
> -};
> -
>  #define PRCMU_FW_PROJECT_U8500		2
>  #define PRCMU_FW_PROJECT_U8400		3
>  #define PRCMU_FW_PROJECT_U9500		4 /* Customer specific */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list