[PATCH 7/7] ARM: dts: NSP: Add bgmac entries

Scott Branden scott.branden at broadcom.com
Fri Jul 8 09:14:17 PDT 2016


Hi Jon,

In Subject line, you mean add amac entries.


On 16-07-08 08:56 AM, Jon Mason wrote:
> Add device tree entries for the ethernet devices present on the
> Broadcom Northstar Plus SoCs
>
> Signed-off-by: Jon Mason <jon.mason at broadcom.com>
> ---
>   arch/arm/boot/dts/bcm-nsp.dtsi   | 18 ++++++++++++++++++
>   arch/arm/boot/dts/bcm958625k.dts |  8 ++++++++
>   2 files changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index def9e78..f6d5abe 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -192,6 +192,24 @@
>   			status = "disabled";
>   		};
>
> +		amac0: ethernet at 22000 {
> +			compatible = "brcm,nsp-amac";
> +			reg = <0x022000 0x1000>,
> +			      <0x110000 0x1000>;
> +			reg-names = "amac_base", "idm_base";
> +			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		amac1: ethernet at 23000 {
> +			compatible = "brcm,nsp-amac";
> +			reg = <0x023000 0x1000>,
> +			      <0x111000 0x1000>;
> +			reg-names = "amac_base", "idm_base";
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
>   		nand: nand at 26000 {
>   			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
>   			reg = <0x026000 0x600>,
> diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
> index e298450..f41a13b 100644
> --- a/arch/arm/boot/dts/bcm958625k.dts
> +++ b/arch/arm/boot/dts/bcm958625k.dts
> @@ -56,6 +56,14 @@
>   	status = "okay";
>   };
>
> +&amac0 {
> +	status = "okay";
> +};
> +
> +&amac1 {
> +	status = "okay";
> +};
> +
>   &pcie0 {
>   	status = "okay";
>   };
>

Regards,
  Scott



More information about the linux-arm-kernel mailing list