[PATCH v2 2/7] bindings: spi-samsung: document the clocks and the clock-name property
Andi Shyti
andi.shyti at samsung.com
Fri Jul 8 07:46:36 PDT 2016
These two properties were not documented but used in the spi
dts. Add the related documentation.
Signed-off-by: Andi Shyti <andi.shyti at samsung.com>
---
Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 57d5539..2b7167e 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt
@@ -24,6 +24,14 @@ Required SoC Specific Properties:
- dma-names: Names for the dma channels. There must be at least one channel
named "tx" for transmit and named "rx" for receive.
+- clocks: specifies the clock IDs provided to the SPI controller; they are
+ required for interacting with the controller itself, for synchronizing the bus
+ and as I/O clock (the latter is required by exynos5433 and exynos7).
+
+- clock-names: string names of the clocks in the 'clocks' property; the names
+ mut be "spi", "spi_busclkN" and "spi_ioclk", where N is determined by
+ "samsung,spi-src-clk".
+
Required Board Specific Properties:
- #address-cells: should be 1.
--
2.8.1
More information about the linux-arm-kernel
mailing list