[PATCH v2 3/3] ARM: dts: blanche: add Ethernet pins

[Sergei Shtylyov]

On 07/04/2016 11:55 PM, Sergei Shtylyov wrote:

> Add the (previously omitted) pin data for the SMSC LAN89218 Ethernet chip
> to the Blanche board's device tree: the chip's IRQ output is connected to
> the SoC's IRQ0 pin and its nCS input is connected to the SoC's EX_CS0# pin.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
>
> ---
>  arch/arm/boot/dts/r8a7792-blanche.dts |   15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts
[...]
> @@ -67,6 +70,18 @@
>  		groups = "scif3_data";
>  		function = "scif3";
>  	};
> +
> +	lan89218_pins: lan89218 {
> +		intc {
> +			groups = "intc_irq0";
> +			function = "intc";
> +		};
> +		lbsc {
> +			groups = "lbsc_ex_cs0";
> +			function = "lbsc";
> +		};
> +	};
> +

    Oops, stray newline... will fix!

>  };
>
>  &scif0 {

MBR, Sergei