[PATCH 2/3] video: fbdev: imxfb: enable lcd regulator in .probe

[Uwe Kleine-König]

Hello Lothar,

On Tue, Jul 05, 2016 at 02:08:38PM +0200, Lothar Waßmann wrote:
> On Tue, 5 Jul 2016 12:09:02 +0200 Uwe Kleine-König wrote:
> > To reach my goal to keep the display on (showing whatever the bootloader
> > initialized the display with) until the application starts caring for
> > the display some driver must enable the regulator. The only candidates
> > are the lcd driver (i.e. the patch under discussion) or some mechanism
> > in the fb core. As there doesn't seem to be code in the core (and the
> > core is dead?) what do you suggest me to do?
> > 
> The simplefb driver (CONFIG_FB_SIMPLE) is designed for exactly this
> purpose. If you rely on the bootloader's framebuffer being preserved
> until your application starts without any driver that reserves the
> corresponding memory, the framebuffer contents may be corrupted by the
> booting kernel.

I don't want to use the simplefb driver because the application makes
use of planes which isn't supported by simplefb. To prevent the
framebuffer being overwritten a chunk of memory at the end of RAM is
reserved (similar to how simplefb is supposed to work).

And even without my usecase of a persistent splash screen, if the fb is
used as console, it should not be disabled either.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |