[PATCH 0/3] ARM: dts: imx6sx: Initial UDOO Neo enablement

[Andreas Färber]

Hello,

This series adds initial support for the i.MX 6SoloX based UDOO Neo boards.

First, a typo in another imx6sx board is fixed, found by code review.

The main patch adds an initial set of device trees with serial, LEDs,
Ethernet, I2C and PMIC.

A second patch adds SD card support. This part does not yet work stable,
I keep getting timeouts on next-20160701 with UDOO Neo Basic after varying time.

Regards,
Andreas

Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Ettore Chimenti <ettore.chimenti at udoo.org>
Cc: devicetree at vger.kernel.org

Andreas Färber (3):
  ARM: dts: imx6sx-sabreauto: Fix misspelled property
  ARM: dts: imx6sx: Add UDOO Neo support
  ARM: dts: imx6sx-udoo-neo: Add SD

 arch/arm/boot/dts/Makefile                     |   5 +-
 arch/arm/boot/dts/imx6sx-sabreauto.dts         |   2 +-
 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts    |  69 ++++++
 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts |  54 +++++
 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts     |  69 ++++++
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi         | 295 +++++++++++++++++++++++++
 6 files changed, 492 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
 create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
 create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
 create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi

-- 
2.6.6