[PATCH v3] arm64: dts: rockchip: add the power domain node for rk3399

[Caesar Wang]

于 2016年07月05日 08:24, Heiko Stuebner 写道:
> Am Montag, 4. Juli 2016, 20:34:04 schrieb Caesar Wang:
>> From: Elaine Zhang <zhangqing at rock-chips.com>
>>
>> In order to meet low power requirements, a power management unit (PMU) is
>> designed for controlling power resources in RK3399. The RK3399 PMU is
>> dedicated for managing the power of the whole chip.
>>
>> 1. add pd node for RK3399 Soc
>> 2. create power domain tree
>> 3. add qos node for domain
>>
>>  From the DT/binds and driver can get more detail information:
>> The driver:
>>          drivers/soc/rockchip/pm_domains.c
>> The document:
>>          Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>>
>> Note:
>> As the TRM lists many voltage domains and power domains, then this patch
>> adds some domains for driver. Due to some domains
>> (e.g. emmc, usb, core)...We can't turned off it on
>> bootup, or says some device driver can't handle the power domain enough.
>> Maybe We will add more other domains in the future or later.
> I talked with Caesar about that today and for example the gmac domain seems
> to cause problems right now when only using the generic power-domain
> handling the kernel provides on probe and remove.
>
> So while this gets investigated, I'm probably ok with only using the stable
> power-domains, but will give the us-people a chance to also respond on
> wednesday :-) .
>
>
>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>> Signed-off-by: Caesar Wang <wxt at rock-chips.com>
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: linux-rockchip at lists.infradead.org
>> Cc: Heiko Stuebner <heiko at sntech.de>
>>
>> ---
>>
>> Changes in v3:
>> - As some commnets on https://patchwork.kernel.org/patch/9209205/
>> - according to the alphabetically sort
>> - %s/RK3399_PD_VOP/RK3399_PD_VOPL, %s/RK3399_PD_IE/RK3399_PD_IEP
>>
>> Changes in v2:
>> - As Doug/Heiko commnets on https://patchwork.kernel.org/patch/9206415/.
>>    drop the debugfs-dump and Add the comments for alphabetical order.
>>
>>   arch/arm64/boot/dts/rockchip/rk3399.dtsi | 179
>> +++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index a6dd623..4559c04 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -45,6 +45,7 @@
>>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/interrupt-controller/irq.h>
>>   #include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/power/rk3399-power.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>
>>   / {
>> @@ -594,6 +595,184 @@
>>   		status = "disabled";
>>   	};
>>
>> +	qos_hdcp: qos_hdcp at ffa90000 {
> I guess I'll just rename that to qos_hdcp: qos at ffa90000
> (similar for the other nodes), as the block itself is the same for all qos
> instances. So if that stays the only comment, there is no need to resend, as
> I can do the change myself.

Yep, that's better.
Thanks.

-Caesar

>
>> +		compatible = "syscon";
>> +		reg = <0x0 0xffa90000 0x0 0x20>;
>> +	};
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
caesar wang | software engineer | wxt at rock-chip.com