[PATCHv2 1/2] arm-ccn: fix PMU interrupt flags

[Mark Rutland]

Currently the IRQ core is permitted to make the CCN PMU IRQ handler
threaded, and will allow userspace to change the CPU affinity of the
interrupt behind our back. Both of these could violate our
synchronisation requirements with the core perf code, which relies upon
strict CPU affinity and disabling of interrupts to guarantee mutual
exclusion in some cases.

As with the CPU PMU drivers, we should request the interrupt with
IRQF_NOBALANCING and IRQF_NO_THREAD, to avoid these issues.

Signed-off-by: Mark Rutland <mark.rutland at arm.com>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Suzuki K Poulose <suzuki.poulose at arm.com>
Cc: Will Deacon <will.deacon at arm.com>
Cc: Olof Johansson <olof at lixom.net>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: <arm at kernel.org>
---
 drivers/bus/arm-ccn.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index acc3eb5..2c99ab2 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1479,8 +1479,9 @@ static int arm_ccn_probe(struct platform_device *pdev)
 		/* Can set 'disable' bits, so can acknowledge interrupts */
 		writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
 				ccn->base + CCN_MN_ERRINT_STATUS);
-		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
-				dev_name(ccn->dev), ccn);
+		err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
+				       IRQF_NOBALANCING | IRQF_NO_THREAD,
+				       dev_name(ccn->dev), ccn);
 		if (err)
 			return err;
 
-- 
1.9.1