[PATCH 2/2] ARM: dts: at91: sama5d2: add ETM, ETB and ETMCK node

[Boris Brezillon]

On Mon, 4 Jul 2016 10:47:21 +0200
Olivier Schonken <olivier.schonken at gmail.com> wrote:

> Hi Boris
> 
> The amba bus is probed after the PIT driver. 

So we clearly have a problem in there...

> I have today found pck0 -
> pck2 to work as well.  Would this be good enough to use?

But why would we reference one of the programmable clock? AFAICT, the
coresight-etb10 block does not depend on any of the programmable clock.

> 
> Regards
> 
> Olivier
> 
> On 2 July 2016 at 20:46, Boris Brezillon <boris.brezillon at free-electrons.com
> > wrote:  
> 
> > Hi Olivier,
> >
> > On Fri, 1 Jul 2016 22:07:53 +0200
> > Olivier Schonken <olivier.schonken at gmail.com> wrote:
> >  
> > > Hi Alexandre
> > >
> > > Resending this mail, the previous one was accidentally in html format,
> > > thus rejected from the list.  My apologies.
> > >
> > > I did try a couple of options regarding the clock, mck included, but
> > > it would then hang when probing occurs in drivers/amba/bus.c when the
> > > clock gets disabled. The dummy clock solved this issue, but I'm open
> > > to better suggestions.  
> >
> > Hm, that's really weird. Is the AMBA bus driver probed before the PIT
> > driver?
> > Anyway, I agree that this dummy clock approach is not ideal. Could we
> > make the apb_pclk clock optional in the AMBA bus driver?
> >
> > The other approach would be to have someone claim the mck clock before
> > the AMBA bus driver, and keep it enabled.
> >
> > Regards,
> >
> > Boris
> >