[PATCH 6/7] dt-bindings: net: bgmac: add bindings documentation for bgmac

[Jon Mason]

On Thu, Jun 30, 2016 at 10:56 PM, Rob Herring <robh at kernel.org> wrote:
> On Thu, Jun 30, 2016 at 06:59:13PM -0400, Jon Mason wrote:
>> Signed-off-by: Jon Mason <jon.mason at broadcom.com>
>> ---
>>  .../devicetree/bindings/net/brcm,bgmac-nsp.txt     | 24 ++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>> new file mode 100644
>> index 0000000..022946c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>> @@ -0,0 +1,24 @@
>> +Broadcom GMAC Ethernet Controller Device Tree Bindings
>> +-------------------------------------------------------------
>> +
>> +Required properties:
>> + - compatible:       "brcm,bgmac-nsp"
>
> Usually we do <soc>-<block> order.

Thanks, I'll make the necessary changes and push out a v2.

>
>> + - reg:              Address and length of the GMAC registers,
>> +             Address and length of the GMAC IDM registers
>> + - reg-names:        Names of the registers.  Must have both "gmac_base" and
>> +             "idm_base"
>> + - interrupts:       Interrupt number
>> +
>> +Optional properties:
>> +- mac-address:       See ethernet.txt file in the same directory
>> +
>> +Examples:
>> +
>> +gmac0: ethernet at 18022000 {
>> +     compatible = "brcm,bgmac-nsp";
>> +     reg = <0x18022000 0x1000>,
>> +           <0x18110000 0x1000>;
>> +     reg-names = "gmac_base", "idm_base";
>> +     interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
>> +     status = "disabled";
>> +};
>> --
>> 1.9.1
>>