[PATCH RFC 10/11] clk: sunxi: rewrite sun6i-ar100 using factors clk

Paul Gortmaker paul.gortmaker at windriver.com
Sun Jan 31 08:59:15 PST 2016


On Mon, Jan 25, 2016 at 8:15 AM, Chen-Yu Tsai <wens at csie.org> wrote:
> sun6i's AR100 clock is a classic factors clk case:
>
> AR100 = ((parent mux) >> p) / (m + 1)
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>

This patch adds a ".remove" function to a driver that is controlled by
a bool Kconfig, and hence the remove code can't be called unless
one explicitly goes into sysfs and muddles with the unbind as root
(which normally has no sane use case for builtin, non-modular code).

Since I'm trying to cut back on the amount of dead code we have
in .remove functions for built in drivers, is there a valid use case
for this one here, or can I just stage a delete commit for it too?

Normally I've set the set the disallow-unbind flag when deleting
a .remove function to make it clear there is no sane use case
for wandering into sysfs and unhooking the builtin driver.

Thanks,
Paul.
--

> ---
>  drivers/clk/sunxi/clk-sun6i-ar100.c | 235 ++++++++++--------------------------
>  1 file changed, 61 insertions(+), 174 deletions(-)
>
> diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c
> index 20887686bdbe..a7f5777834eb 100644
> --- a/drivers/clk/sunxi/clk-sun6i-ar100.c
> +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c
> @@ -8,211 +8,97 @@
>   *
>   */
>
> +#include <linux/bitops.h>
>  #include <linux/clk-provider.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> +#include <linux/spinlock.h>
>
> -#define SUN6I_AR100_MAX_PARENTS                4
> -#define SUN6I_AR100_SHIFT_MASK         0x3
> -#define SUN6I_AR100_SHIFT_MAX          SUN6I_AR100_SHIFT_MASK
> -#define SUN6I_AR100_SHIFT_SHIFT                4
> -#define SUN6I_AR100_DIV_MASK           0x1f
> -#define SUN6I_AR100_DIV_MAX            (SUN6I_AR100_DIV_MASK + 1)
> -#define SUN6I_AR100_DIV_SHIFT          8
> -#define SUN6I_AR100_MUX_MASK           0x3
> -#define SUN6I_AR100_MUX_SHIFT          16
> -
> -struct ar100_clk {
> -       struct clk_hw hw;
> -       void __iomem *reg;
> -};
> -
> -static inline struct ar100_clk *to_ar100_clk(struct clk_hw *hw)
> -{
> -       return container_of(hw, struct ar100_clk, hw);
> -}
> -
> -static unsigned long ar100_recalc_rate(struct clk_hw *hw,
> -                                      unsigned long parent_rate)
> -{
> -       struct ar100_clk *clk = to_ar100_clk(hw);
> -       u32 val = readl(clk->reg);
> -       int shift = (val >> SUN6I_AR100_SHIFT_SHIFT) & SUN6I_AR100_SHIFT_MASK;
> -       int div = (val >> SUN6I_AR100_DIV_SHIFT) & SUN6I_AR100_DIV_MASK;
> -
> -       return (parent_rate >> shift) / (div + 1);
> -}
> -
> -static int ar100_determine_rate(struct clk_hw *hw,
> -                               struct clk_rate_request *req)
> -{
> -       int nparents = clk_hw_get_num_parents(hw);
> -       long best_rate = -EINVAL;
> -       int i;
> -
> -       req->best_parent_hw = NULL;
> -
> -       for (i = 0; i < nparents; i++) {
> -               unsigned long parent_rate;
> -               unsigned long tmp_rate;
> -               struct clk_hw *parent;
> -               unsigned long div;
> -               int shift;
> -
> -               parent = clk_hw_get_parent_by_index(hw, i);
> -               parent_rate = clk_hw_get_rate(parent);
> -               div = DIV_ROUND_UP(parent_rate, req->rate);
> -
> -               /*
> -                * The AR100 clk contains 2 divisors:
> -                * - one power of 2 divisor
> -                * - one regular divisor
> -                *
> -                * First check if we can safely shift (or divide by a power
> -                * of 2) without losing precision on the requested rate.
> -                */
> -               shift = ffs(div) - 1;
> -               if (shift > SUN6I_AR100_SHIFT_MAX)
> -                       shift = SUN6I_AR100_SHIFT_MAX;
> -
> -               div >>= shift;
> -
> -               /*
> -                * Then if the divisor is still bigger than what the HW
> -                * actually supports, use a bigger shift (or power of 2
> -                * divider) value and accept to lose some precision.
> -                */
> -               while (div > SUN6I_AR100_DIV_MAX) {
> -                       shift++;
> -                       div >>= 1;
> -                       if (shift > SUN6I_AR100_SHIFT_MAX)
> -                               break;
> -               }
> -
> -               /*
> -                * If the shift value (or power of 2 divider) is bigger
> -                * than what the HW actually support, skip this parent.
> -                */
> -               if (shift > SUN6I_AR100_SHIFT_MAX)
> -                       continue;
> -
> -               tmp_rate = (parent_rate >> shift) / div;
> -               if (!req->best_parent_hw || tmp_rate > best_rate) {
> -                       req->best_parent_hw = parent;
> -                       req->best_parent_rate = parent_rate;
> -                       best_rate = tmp_rate;
> -               }
> -       }
> -
> -       if (best_rate < 0)
> -               return best_rate;
> -
> -       req->rate = best_rate;
> -
> -       return 0;
> -}
> -
> -static int ar100_set_parent(struct clk_hw *hw, u8 index)
> -{
> -       struct ar100_clk *clk = to_ar100_clk(hw);
> -       u32 val = readl(clk->reg);
> -
> -       if (index >= SUN6I_AR100_MAX_PARENTS)
> -               return -EINVAL;
> -
> -       val &= ~(SUN6I_AR100_MUX_MASK << SUN6I_AR100_MUX_SHIFT);
> -       val |= (index << SUN6I_AR100_MUX_SHIFT);
> -       writel(val, clk->reg);
> -
> -       return 0;
> -}
> +#include "clk-factors.h"
>
> -static u8 ar100_get_parent(struct clk_hw *hw)
> -{
> -       struct ar100_clk *clk = to_ar100_clk(hw);
> -       return (readl(clk->reg) >> SUN6I_AR100_MUX_SHIFT) &
> -              SUN6I_AR100_MUX_MASK;
> -}
> -
> -static int ar100_set_rate(struct clk_hw *hw, unsigned long rate,
> -                         unsigned long parent_rate)
> +/**
> + * sun6i_get_ar100_factors - Calculates factors p, m for AR100
> + *
> + * AR100 rate is calculated as follows
> + * rate = (parent_rate >> p) / (m + 1);
> + */
> +static void sun6i_get_ar100_factors(struct factors_request *req)
>  {
> -       unsigned long div = parent_rate / rate;
> -       struct ar100_clk *clk = to_ar100_clk(hw);
> -       u32 val = readl(clk->reg);
> +       unsigned long div;
>         int shift;
>
> -       if (parent_rate % rate)
> -               return -EINVAL;
> +       /* clock only divides */
> +       if (req->rate > req->parent_rate)
> +               req->rate = req->parent_rate;
>
> -       shift = ffs(div) - 1;
> -       if (shift > SUN6I_AR100_SHIFT_MAX)
> -               shift = SUN6I_AR100_SHIFT_MAX;
> +       div = DIV_ROUND_UP(req->parent_rate, req->rate);
>
> -       div >>= shift;
> +       if (div < 32)
> +               shift = 0;
> +       else if (div >> 1 < 32)
> +               shift = 1;
> +       else if (div >> 2 < 32)
> +               shift = 2;
> +       else
> +               shift = 3;
>
> -       if (div > SUN6I_AR100_DIV_MAX)
> -               return -EINVAL;
> +       div >>= shift;
>
> -       val &= ~((SUN6I_AR100_SHIFT_MASK << SUN6I_AR100_SHIFT_SHIFT) |
> -                (SUN6I_AR100_DIV_MASK << SUN6I_AR100_DIV_SHIFT));
> -       val |= (shift << SUN6I_AR100_SHIFT_SHIFT) |
> -              (div << SUN6I_AR100_DIV_SHIFT);
> -       writel(val, clk->reg);
> +       if (div > 32)
> +               div = 32;
>
> -       return 0;
> +       req->rate = (req->parent_rate >> shift) / div;
> +       req->m = div - 1;
> +       req->p = shift;
>  }
>
> -static struct clk_ops ar100_ops = {
> -       .recalc_rate = ar100_recalc_rate,
> -       .determine_rate = ar100_determine_rate,
> -       .set_parent = ar100_set_parent,
> -       .get_parent = ar100_get_parent,
> -       .set_rate = ar100_set_rate,
> +static const struct clk_factors_config sun6i_ar100_config = {
> +       .mwidth = 5,
> +       .mshift = 8,
> +       .pwidth = 2,
> +       .pshift = 4,
>  };
>
> +static const struct factors_data sun6i_ar100_data __initconst = {
> +       .mux = 16,
> +       .muxmask = GENMASK(1, 0),
> +       .table = &sun6i_ar100_config,
> +       .getter = sun6i_get_ar100_factors,
> +};
> +
> +static DEFINE_SPINLOCK(sun6i_ar100_lock);
> +
>  static int sun6i_a31_ar100_clk_probe(struct platform_device *pdev)
>  {
> -       const char *parents[SUN6I_AR100_MAX_PARENTS];
>         struct device_node *np = pdev->dev.of_node;
> -       const char *clk_name = np->name;
> -       struct clk_init_data init;
> -       struct ar100_clk *ar100;
>         struct resource *r;
> +       void __iomem *reg;
>         struct clk *clk;
> -       int nparents;
> -
> -       ar100 = devm_kzalloc(&pdev->dev, sizeof(*ar100), GFP_KERNEL);
> -       if (!ar100)
> -               return -ENOMEM;
>
>         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -       ar100->reg = devm_ioremap_resource(&pdev->dev, r);
> -       if (IS_ERR(ar100->reg))
> -               return PTR_ERR(ar100->reg);
> +       reg = devm_ioremap_resource(&pdev->dev, r);
> +       if (IS_ERR(reg))
> +               return PTR_ERR(reg);
>
> -       nparents = of_clk_get_parent_count(np);
> -       if (nparents > SUN6I_AR100_MAX_PARENTS)
> -               nparents = SUN6I_AR100_MAX_PARENTS;
> -
> -       of_clk_parent_fill(np, parents, nparents);
> +       clk = sunxi_factors_register(np, &sun6i_ar100_data, &sun6i_ar100_lock,
> +                                    reg);
> +       if (!clk)
> +               return -ENOMEM;
>
> -       of_property_read_string(np, "clock-output-names", &clk_name);
> +       platform_set_drvdata(pdev, clk);
>
> -       init.name = clk_name;
> -       init.ops = &ar100_ops;
> -       init.parent_names = parents;
> -       init.num_parents = nparents;
> -       init.flags = 0;
> +       return 0;
> +}
>
> -       ar100->hw.init = &init;
> +static int sun6i_a31_ar100_clk_remove(struct platform_device *pdev)
> +{
> +       struct device_node *np = pdev->dev.of_node;
> +       struct clk *clk = platform_get_drvdata(pdev);
>
> -       clk = clk_register(&pdev->dev, &ar100->hw);
> -       if (IS_ERR(clk))
> -               return PTR_ERR(clk);
> +       sunxi_factors_unregister(np, clk);
>
> -       return of_clk_add_provider(np, of_clk_src_simple_get, clk);
> +       return 0;
>  }
>
>  static const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = {
> @@ -227,6 +113,7 @@ static struct platform_driver sun6i_a31_ar100_clk_driver = {
>                 .of_match_table = sun6i_a31_ar100_clk_dt_ids,
>         },
>         .probe = sun6i_a31_ar100_clk_probe,
> +       .remove = sun6i_a31_ar100_clk_remove,
>  };
>  module_platform_driver(sun6i_a31_ar100_clk_driver);
>
> --
> 2.7.0
>



More information about the linux-arm-kernel mailing list