[PATCH v4 2/9] ARM: dts: bockw: Enable SCIF_CLK frequency and pins

[Geert Uytterhoeven]

Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Based on schematics, tested with remote access.

v4:
  - Change one-line summary prefix to match current arm-soc practices,
  - Move scif_clk next to scif0, for consistency with other boards,

v3:
  - New.
---
 arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index a52b359e2ae24a30..21e3b9dda2dabf5e 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -126,11 +126,19 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_a", "scif0_ctrl";
 		renesas,function = "scif0";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	mmc_pins: mmc {
 		renesas,groups = "mmc_data8", "mmc_ctrl";
 		renesas,function = "mmc";
@@ -217,3 +225,8 @@
 
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
-- 
1.9.1