[PATCH] ARM: dts: emev2:use GIC_* defines
Simon Horman
horms at verge.net.au
Thu Jan 28 16:26:10 PST 2016
On Thu, Jan 28, 2016 at 09:15:50AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Thu, Jan 28, 2016 at 2:29 AM, Simon Horman
> <horms+renesas at verge.net.au> wrote:
> > Use GIC_* defines for GIC interrupt cells in emev2 device tree.
> >
> > Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
> > ---
> > Based on renesas-devel-20160127-v4.5-rc1
> > ---
> > arch/arm/boot/dts/emev2.dtsi | 37 +++++++++++++++++++------------------
> > 1 file changed, 19 insertions(+), 18 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
> > index 57795da616cb..366e822367c7 100644
> > --- a/arch/arm/boot/dts/emev2.dtsi
> > +++ b/arch/arm/boot/dts/emev2.dtsi
> > @@ -9,6 +9,7 @@
> > */
> >
> > #include "skeleton.dtsi"
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/interrupt-controller/irq.h>
> >
> > / {
> > @@ -53,7 +54,7 @@
> >
> > pmu {
> > compatible = "arm,cortex-a9-pmu";
> > - interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
> > + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> > <0 121 IRQ_TYPE_LEVEL_HIGH>;
>
> If you convert the above line, too, you can add my
> Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
Thanks, I have fixed that and queued up the following:
From: Simon Horman <horms+renesas at verge.net.au>
Date: Thu, 28 Jan 2016 10:29:54 +0900
Subject: [PATCH] ARM: dts: emev2:use GIC_* defines
Use GIC_* defines for GIC interrupt cells in emev2 device tree.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
arch/arm/boot/dts/emev2.dtsi | 39 ++++++++++++++++++++-------------------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 57795da616cb..bcce6f50c93d 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -53,8 +54,8 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks at e0110000 {
@@ -158,7 +159,7 @@
timer at e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sti_sclk>;
clock-names = "sclk";
};
@@ -166,7 +167,7 @@
uart0: serial at e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usia_u0_sclk>;
clock-names = "sclk";
};
@@ -174,7 +175,7 @@
uart1: serial at e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u1_sclk>;
clock-names = "sclk";
};
@@ -182,7 +183,7 @@
uart2: serial at e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u2_sclk>;
clock-names = "sclk";
};
@@ -190,7 +191,7 @@
uart3: serial at e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u3_sclk>;
clock-names = "sclk";
};
@@ -203,8 +204,8 @@
gpio0: gpio at e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
- <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#gpio-cells = <2>;
@@ -215,8 +216,8 @@
gpio1: gpio at e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#gpio-cells = <2>;
@@ -227,8 +228,8 @@
gpio2: gpio at e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
- <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#gpio-cells = <2>;
@@ -239,8 +240,8 @@
gpio3: gpio at e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
- <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#gpio-cells = <2>;
@@ -251,8 +252,8 @@
gpio4: gpio at e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 128 31>;
#gpio-cells = <2>;
@@ -266,7 +267,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
- interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
status = "disabled";
@@ -277,7 +278,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe10a0000 0x28>;
- interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic1_sclk>;
clock-names = "sclk";
status = "disabled";
--
2.1.4
More information about the linux-arm-kernel
mailing list