[PATCH] ARM: dts: vf-colibri-eval-v3: Use enable-gpios for BL_ON

[Stefan Agner]

On 2016-01-28 00:39, Shawn Guo wrote:
> On Sat, Jan 09, 2016 at 12:29:53PM +0530, Bhuvanchandra DV wrote:
>> Use pwm-backlight driver 'enable-gpios' property for backlight on/off
>> control.
>>
>> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
>> ---
>>  arch/arm/boot/dts/vf-colibri.dtsi | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
>> index e5949b9..1c0da05 100644
>> --- a/arch/arm/boot/dts/vf-colibri.dtsi
>> +++ b/arch/arm/boot/dts/vf-colibri.dtsi
>> @@ -10,7 +10,10 @@
>>  / {
>>  	bl: backlight {
>>  		compatible = "pwm-backlight";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_gpio_bl_on>;
>>  		pwms = <&pwm0 0 5000000 0>;
>> +		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
>>  		status = "disabled";
>>  	};
>>  };
>> @@ -169,6 +172,12 @@
>>  			>;
>>  		};
>>
>> +		pinctrl_gpio_bl_on: gpio_bl_on {
>> +			fsl,pins = <
>> +				VF610_PAD_PTC0__GPIO_45		0x22ef
>> +			>;
>> +		};
>> +
> 
> @Stefan,
> 
> Do we need this?  My understanding is that on Vybrid, when gpio is
> requested, the pinctrl will set it up automatically.

Yes this is required. The GPIO driver asks the pinctrl driver to enable
the GPIO, and the pinctrl driver requires a "valid" pinmux configuration
to be able to find the IOMUXC register at all.

Acked-by: Stefan Agner <stefan at agner.ch>

--
Stefan