[PATCH v10 10/21] KVM: ARM64: Add access handler for PMCNTENSET and PMCNTENCLR register
Andrew Jones
drjones at redhat.com
Thu Jan 28 10:08:56 PST 2016
On Wed, Jan 27, 2016 at 11:51:38AM +0800, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao at linaro.org>
>
> Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use
> reset_unknown for its reset handler. Add a handler to emulate writing
> PMCNTENSET or PMCNTENCLR register.
>
> When writing to PMCNTENSET, call perf_event_enable to enable the perf
> event. When writing to PMCNTENCLR, call perf_event_disable to disable
> the perf event.
>
> Signed-off-by: Shannon Zhao <shannon.zhao at linaro.org>
> ---
> arch/arm64/kvm/sys_regs.c | 35 +++++++++++++++++++++++---
> include/kvm/arm_pmu.h | 9 +++++++
> virt/kvm/arm/pmu.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 103 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 6a50262..d43a9a4 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -603,6 +603,33 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
> return true;
> }
>
> +static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
> + const struct sys_reg_desc *r)
> +{
> + u64 val, mask;
> +
> + if (!kvm_arm_pmu_v3_ready(vcpu))
> + return trap_raz_wi(vcpu, p, r);
> +
> + mask = kvm_pmu_valid_counter_mask(vcpu);
> + if (p->is_write) {
> + val = p->regval & mask;
> + if (r->Op2 & 0x1) {
> + /* accessing PMCNTENSET_EL0 */
> + vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
> + kvm_pmu_enable_counter(vcpu, val);
> + } else {
> + /* accessing PMCNTENCLR_EL0 */
> + vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
> + kvm_pmu_disable_counter(vcpu, val);
> + }
> + } else {
> + p->regval = vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask;
> + }
> +
> + return true;
> +}
> +
> /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
> #define DBG_BCR_BVR_WCR_WVR_EL1(n) \
> /* DBGBVRn_EL1 */ \
> @@ -804,10 +831,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
> access_pmcr, reset_pmcr, },
> /* PMCNTENSET_EL0 */
> { Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
> - trap_raz_wi },
> + access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
> /* PMCNTENCLR_EL0 */
> { Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
> - trap_raz_wi },
> + access_pmcnten, NULL, PMCNTENSET_EL0 },
I don't think the reg field is needed, as the reset handler isn't
defined and the access handler doesn't use it. Oh, and shouldn't it be
PMCNTENCLR_EL0 anyway?
> /* PMOVSCLR_EL0 */
> { Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
> trap_raz_wi },
> @@ -1149,8 +1176,8 @@ static const struct sys_reg_desc cp15_regs[] = {
>
> /* PMU */
> { Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmcr },
> - { Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
> - { Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
> + { Op1( 0), CRn( 9), CRm(12), Op2( 1), access_pmcnten },
> + { Op1( 0), CRn( 9), CRm(12), Op2( 2), access_pmcnten },
> { Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
> { Op1( 0), CRn( 9), CRm(12), Op2( 5), access_pmselr },
> { Op1( 0), CRn( 9), CRm(12), Op2( 6), access_pmceid },
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> index ee4b15c..a7e5485 100644
> --- a/include/kvm/arm_pmu.h
> +++ b/include/kvm/arm_pmu.h
> @@ -37,6 +37,9 @@ struct kvm_pmu {
>
> #define kvm_arm_pmu_v3_ready(v) ((v)->arch.pmu.ready)
> u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx);
> +u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu);
> +void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val);
> +void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val);
> void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
> u64 select_idx);
> #else
> @@ -49,6 +52,12 @@ static inline u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu,
> {
> return 0;
> }
> +static inline u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
> +{
> + return 0;
> +}
> +static inline void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val) {}
> +static inline void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val) {}
> static inline void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu,
> u64 data, u64 select_idx) {}
> #endif
> diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c
> index 673ec55..0873977 100644
> --- a/virt/kvm/arm/pmu.c
> +++ b/virt/kvm/arm/pmu.c
> @@ -68,6 +68,69 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc)
> }
> }
>
> +u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
> +{
> + u64 val = vcpu_sys_reg(vcpu, PMCR_EL0) >> ARMV8_PMCR_N_SHIFT;
> +
> + val &= ARMV8_PMCR_N_MASK;
> + return GENMASK(val - 1, 0) | BIT(ARMV8_CYCLE_IDX);
val can be zero if PMCR.N is zero (meaning only the cycle counter is
implemented). We should confirm it's not zero before calling GENMASK.
> +}
> +
> +/**
> + * kvm_pmu_enable_counter - enable selected PMU counter
> + * @vcpu: The vcpu pointer
> + * @val: the value guest writes to PMCNTENSET register
> + *
> + * Call perf_event_enable to start counting the perf event
> + */
> +void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val)
> +{
> + int i;
> + struct kvm_pmu *pmu = &vcpu->arch.pmu;
> + struct kvm_pmc *pmc;
> +
> + if (!(vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) || !val)
> + return;
> +
> + for (i = 0; i < ARMV8_MAX_COUNTERS; i++) {
> + if (!(val & BIT(i)))
> + continue;
> +
> + pmc = &pmu->pmc[i];
> + if (pmc->perf_event) {
> + perf_event_enable(pmc->perf_event);
> + if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
> + kvm_debug("fail to enable perf event\n");
> + }
> + }
> +}
> +
> +/**
> + * kvm_pmu_disable_counter - disable selected PMU counter
> + * @vcpu: The vcpu pointer
> + * @val: the value guest writes to PMCNTENCLR register
> + *
> + * Call perf_event_disable to stop counting the perf event
> + */
> +void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val)
> +{
> + int i;
> + struct kvm_pmu *pmu = &vcpu->arch.pmu;
> + struct kvm_pmc *pmc;
> +
> + if (!val)
> + return;
> +
> + for (i = 0; i < ARMV8_MAX_COUNTERS; i++) {
> + if (!(val & BIT(i)))
> + continue;
> +
> + pmc = &pmu->pmc[i];
> + if (pmc->perf_event)
> + perf_event_disable(pmc->perf_event);
> + }
> +}
> +
> static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u64 select_idx)
> {
> return (vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMCR_E) &&
> --
> 2.0.4
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list