[PATCH v4 4/9] ARM: dts: rockchip: add support emac for RK3036

[Caesar Wang]

From: zhengxing <zhengxing at rock-chips.com>

This patch describe the emac, and we need to let mac clock under
the APLL which is able to provide the accurate 50MHz what mac_ref
need.

This patch makes the emac parent clock is DPLL instead of APLL.
since that will cause some unstable things if the cpufreq is working.

Signed-off-by: Xing Zheng <zhengxing at rock-chips.com>
Signed-off-by: Caesar Wang <wxt at rock-chips.com>

---

Changes in v4:
- included in the kylin series patches.
- This patch picked up from https://patchwork.kernel.org/patch/7924971/
- Change to solve the conflict based on the Heiko's branch.
- Make the emac parent as the DPLL.

 arch/arm/boot/dts/rk3036-evb.dts   | 23 ++++++++++++++++++++++
 arch/arm/boot/dts/rk3036-kylin.dts | 21 ++++++++++++++++++++
 arch/arm/boot/dts/rk3036.dtsi      | 39 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 83 insertions(+)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..d7d3719 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -47,6 +47,17 @@
 	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -62,3 +73,15 @@
 &uart2 {
 	status = "okay";
 };
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 1037ad6..cd45434 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -112,6 +112,17 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+	};
+};
+
 &emmc {
 	status = "okay";
 };
@@ -382,6 +393,16 @@
 };
 
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <2 22 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
 	leds {
 		led_ctl: led-ctl {
 			rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 7abe3e2..532f232 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -222,6 +222,27 @@
 		status = "disabled";
 	};
 
+	emac: ethernet at 10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
 	sdmmc: dwmmc at 10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -613,6 +634,24 @@
 			};
 		};
 
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
-- 
1.9.1