[PATCH] mmc: pwrseq_simple: Support assigned-clocks

[Ulf Hansson]

+ Srini

On 8 January 2016 at 10:59, Martin Fuzzey <mfuzzey at parkeon.com> wrote:
> The clock subsystem now allows clock rates and parents to be configured
> in the device tree.
>
> This requires calling of_clk_set_defaults() which is done automatically
> for platform, i2c, spi devices. Since pwrseq_simple does not fit into
> those catagories we must do it ourself.
>
> With this patch the standard assigned-clocks, assigned-clock-rates,
> assigned-clock-parents DT properties to be used in pwrseq_simple nodes.

I believe this should be solved when we have converted the each pwrseq
method to become a platform driver. This is being worked on by
Srinivas Kandagatla.
http://www.spinics.net/lists/arm-kernel/msg475605.html

Kind regards
Ulf Hansson

>
> Signed-off-by: Martin Fuzzey <mfuzzey at parkeon.com>
> ---
>  drivers/mmc/core/pwrseq_simple.c |    5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
> index 4d2962b..fd8f38e 100644
> --- a/drivers/mmc/core/pwrseq_simple.c
> +++ b/drivers/mmc/core/pwrseq_simple.c
> @@ -8,6 +8,7 @@
>   *  Simple MMC power sequence management
>   */
>  #include <linux/clk.h>
> +#include <linux/clk/clk-conf.h>
>  #include <linux/kernel.h>
>  #include <linux/slab.h>
>  #include <linux/device.h>
> @@ -108,6 +109,10 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host,
>         if (!pwrseq)
>                 return ERR_PTR(-ENOMEM);
>
> +       ret = of_clk_set_defaults(dev->of_node, false);
> +       if (ret)
> +               goto free;
> +
>         pwrseq->ext_clk = clk_get(dev, "ext_clock");
>         if (IS_ERR(pwrseq->ext_clk) &&
>             PTR_ERR(pwrseq->ext_clk) != -ENOENT) {
>