[PATCH v2] serial: atmel: Use atmel_port consistently
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Jan 26 03:04:06 PST 2016
From: Jaeden Amero <jaeden.amero at ni.com>
In all functions other than atmel_serial_probe_fifos,
atmel_serial_probe, and atmel_console_init, the name "port" is used to
refer to an instance of struct uart_port. In many of these functions,
"atmel_port" is used to refer to an instance of struct atmel_uart_port.
We make the use of the name "port" consistent by making
atmel_serial_probe_fifos, atmel_serial_probe, and atmel_console_init
use "atmel_port" to refer to an instance of struct atmel_uart_port
instead of the previous name of "port".
Signed-off-by: Jaeden Amero <jaeden.amero at ni.com>
Signed-off-by: Kyle Roeschley <kyle.roeschley at ni.com>
Acked-by: Karthik Manamcheri <karthik.manamcheri at ni.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
v2: - fix typo in variable
drivers/tty/serial/atmel_serial.c | 81 ++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 40 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1c0884d8ef32..555111955b75 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2478,13 +2478,13 @@ static int __init atmel_console_init(void)
struct atmel_uart_data *pdata =
dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
- struct atmel_uart_port *port = &atmel_ports[id];
+ struct atmel_uart_port *atmel_port = &atmel_ports[id];
- port->backup_imr = 0;
- port->uart.line = id;
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
- ret = atmel_init_port(port, atmel_default_console_device);
+ ret = atmel_init_port(atmel_port, atmel_default_console_device);
if (ret)
return ret;
register_console(&atmel_console);
@@ -2599,23 +2599,23 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
-static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
+static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
- port->fifo_size = 0;
- port->rts_low = 0;
- port->rts_high = 0;
+ atmel_port->fifo_size = 0;
+ atmel_port->rts_low = 0;
+ atmel_port->rts_high = 0;
if (of_property_read_u32(pdev->dev.of_node,
"atmel,fifo-size",
- &port->fifo_size))
+ &atmel_port->fifo_size))
return;
- if (!port->fifo_size)
+ if (!atmel_port->fifo_size)
return;
- if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
- port->fifo_size = 0;
+ if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
+ atmel_port->fifo_size = 0;
dev_err(&pdev->dev, "Invalid FIFO size\n");
return;
}
@@ -2628,22 +2628,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
* Threshold to a reasonably high value respecting this 16 data
* empirical rule when possible.
*/
- port->rts_high = max_t(int, port->fifo_size >> 1,
- port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
- port->rts_low = max_t(int, port->fifo_size >> 2,
- port->fifo_size - ATMEL_RTS_LOW_OFFSET);
+ atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1,
+ atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
+ atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2,
+ atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET);
dev_info(&pdev->dev, "Using FIFO (%u data)\n",
- port->fifo_size);
+ atmel_port->fifo_size);
dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
- port->rts_high);
+ atmel_port->rts_high);
dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
- port->rts_low);
+ atmel_port->rts_low);
}
static int atmel_serial_probe(struct platform_device *pdev)
{
- struct atmel_uart_port *port;
+ struct atmel_uart_port *atmel_port;
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
@@ -2674,14 +2674,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err;
}
- port = &atmel_ports[ret];
- port->backup_imr = 0;
- port->uart.line = ret;
- atmel_serial_probe_fifos(port, pdev);
+ atmel_port = &atmel_ports[ret];
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = ret;
+ atmel_serial_probe_fifos(atmel_port, pdev);
- spin_lock_init(&port->lock_suspended);
+ spin_lock_init(&atmel_port->lock_suspended);
- ret = atmel_init_port(port, pdev);
+ ret = atmel_init_port(atmel_port, pdev);
if (ret)
goto err_clear_bit;
@@ -2691,34 +2691,34 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err_clear_bit;
}
- if (!atmel_use_pdc_rx(&port->uart)) {
+ if (!atmel_use_pdc_rx(&atmel_port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
if (!data)
goto err_alloc_ring;
- port->rx_ring.buf = data;
+ atmel_port->rx_ring.buf = data;
}
- rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
+ rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED;
- ret = uart_add_one_port(&atmel_uart, &port->uart);
+ ret = uart_add_one_port(&atmel_uart, &atmel_port->uart);
if (ret)
goto err_add_port;
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
- if (atmel_is_console_port(&port->uart)
+ if (atmel_is_console_port(&atmel_port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
* the clk_prepare_enable() in atmel_console_setup()
*/
- clk_disable_unprepare(port->clk);
+ clk_disable_unprepare(atmel_port->clk);
}
#endif
device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
+ platform_set_drvdata(pdev, atmel_port);
/*
* The peripheral clock has been disabled by atmel_init_port():
@@ -2727,9 +2727,10 @@ static int atmel_serial_probe(struct platform_device *pdev)
clk_prepare_enable(port->clk);
if (rs485_enabled) {
- atmel_uart_writel(&port->uart, ATMEL_US_MR,
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
ATMEL_US_USMODE_NORMAL);
- atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR,
+ ATMEL_US_RTSEN);
}
/*
@@ -2746,12 +2747,12 @@ static int atmel_serial_probe(struct platform_device *pdev)
return 0;
err_add_port:
- kfree(port->rx_ring.buf);
- port->rx_ring.buf = NULL;
+ kfree(atmel_port->rx_ring.buf);
+ atmel_port->rx_ring.buf = NULL;
err_alloc_ring:
- if (!atmel_is_console_port(&port->uart)) {
- clk_put(port->clk);
- port->clk = NULL;
+ if (!atmel_is_console_port(&atmel_port->uart)) {
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
}
err_clear_bit:
clear_bit(port->uart.line, atmel_ports_in_use);
--
2.1.3
More information about the linux-arm-kernel
mailing list