[PATCH v2] ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl
Andrew Lunn
andrew at lunn.ch
Mon Jan 25 05:24:10 PST 2016
On Mon, Jan 25, 2016 at 08:20:03AM +0900, Roger Shimizu wrote:
> Add dts file to support Buffalo Linkstation LS-QVL,
> which is marvell kirkwood based 4-bay 3.5" HDD NAS.
> Product info:
> - (JPN) http://buffalo.jp/product/hdd/network/ls-qvl_r5/
> - (ENG) http://www.buffalotech.com/products/network-storage/home-and-small-office/linkstation-pro-quad
>
> Signed-off-by: Mario Lange <mario_lange at gmx.net>
> Signed-off-by: Roger Shimizu <rogershimizu at gmail.com>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
Thanks
Andrew
> ---
> .../devicetree/bindings/arm/marvell,kirkwood.txt | 1 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts | 135 +++++++++++++++++++++
> 3 files changed, 137 insertions(+)
> create mode 100644 arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> index 0d5d0f607d6c..345db8031196 100644
> --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
> @@ -19,6 +19,7 @@ SoC. Currently known SoC compatibles are:
> And in addition, the compatible shall be extended with the specific
> board. Currently known boards are:
>
> +"buffalo,linkstation-lsqvl"
> "buffalo,linkstation-lsvl"
> "buffalo,linkstation-lswsxl"
> "buffalo,linkstation-lswxl"
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 3e2cf27d2368..68625754f398 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -183,6 +183,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
> kirkwood-is2.dtb \
> kirkwood-km_kirkwood.dtb \
> kirkwood-laplug.dtb \
> + kirkwood-linkstation-lsqvl.dtb \
> kirkwood-linkstation-lsvl.dtb \
> kirkwood-linkstation-lswsxl.dtb \
> kirkwood-linkstation-lswvl.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
> new file mode 100644
> index 000000000000..6dc0df2969f0
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
> @@ -0,0 +1,135 @@
> +/*
> + * Device Tree file for Buffalo Linkstation LS-QVL
> + *
> + * Copyright (C) 2016, Mario Lange <mario_lange at gmx.net>
> + *
> + * Based on kirkwood-linkstation-lswvl.dts,
> + * Copyright (C) 2015, 2016
> + * Roger Shimizu <rogershimizu at gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "kirkwood-linkstation-6282.dtsi"
> +
> +/ {
> + model = "Buffalo Linkstation LS-QVL";
> + compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
> +
> + memory { /* 256 MB */
> + device_type = "memory";
> + reg = <0x00000000 0x10000000>;
> + };
> +
> + ocp at f1000000 {
> + pinctrl: pin-controller at 10000 {
> + pmx_power_hdd1: pmx-power-hdd1 {
> + marvell,pins = "mpp9";
> + marvell,function = "gpio";
> + };
> + pmx_led_hdderr0: pmx-led-hdderr0 {
> + marvell,pins = "mpp34";
> + marvell,function = "gpio";
> + };
> + pmx_led_hdderr1: pmx-led-hdderr1 {
> + marvell,pins = "mpp35";
> + marvell,function = "gpio";
> + };
> + pmx_led_hdderr2: pmx-led-hdderr2 {
> + marvell,pins = "mpp24";
> + marvell,function = "gpio";
> + };
> + pmx_led_hdderr3: pmx-led-hdderr3 {
> + marvell,pins = "mpp25";
> + marvell,function = "gpio";
> + };
> + };
> +
> + sata at 80000 {
> + nr-ports = <2>;
> + };
> + };
> +
> + gpio_leds {
> + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
> + &pmx_led_info &pmx_led_power
> + &pmx_led_function_blue
> + &pmx_led_hdderr0
> + &pmx_led_hdderr1
> + &pmx_led_hdderr2
> + &pmx_led_hdderr3>;
> +
> + red-hdderr0-led {
> + label = "linkstation:red:hdderr0";
> + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + red-hdderr1-led {
> + label = "linkstation:red:hdderr1";
> + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + red-hdderr2-led {
> + label = "linkstation:red:hdderr2";
> + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
> + };
> +
> + red-hdderr3-led {
> + label = "linkstation:red:hdderr3";
> + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + regulators {
> + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
> +
> + hdd_power1: regulator at 3 {
> + compatible = "regulator-fixed";
> + reg = <3>;
> + regulator-name = "HDD1 Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
> + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +};
> --
> 2.1.4
>
More information about the linux-arm-kernel
mailing list