[PATCH v3 1/1] USB: core: let USB device know device node

[Peter Chen]

On Mon, Jan 25, 2016 at 09:50:53AM +0100, Arnd Bergmann wrote:
> On Monday 25 January 2016 11:57:37 Peter Chen wrote:
> > >> >
> > >> >             hub at 3 { /* same external  hub, highspeed mode */
> > >> >                     compatible = "usb2109,0812.591",
> > >> >                                  "usb2109,0812",
> > >> >                                  "usb2109,class9.0.1",
> > >> >                                  "usb2109,class9.0",
> > >> >                                  "usb2109,class9";
> > >> >
> > >> >                     #address-cells = <1>;
> > >> >                     #size-cells = <0>;
> > >> >                     reg = >;
> > >> >
> > >>
> > >> Why "reg" is 3 here?
> > >
> > > My mistake. It should be hub at 1 and reg=<1>;
> > >
> > > I accidentally confused the port number and the device number.
> > 
> > I think it should be hub at 2 and reg=<0x2>.
> > According to Alan, we should use xHCI numbering scheme when
> > describing the ports of an xHCI root hub.
> 
> For a single-port root hub, that would be right. My PC has
> two ports, so the first port has reg=<0x1> for SS and
> reg=<0x3> for HS.
> 

Yes, you are right.

Alan, do you know which physical number is larger for
the same port, HS or SS port? Is it spec defined or vendor defined?
I haven't found related information at xHCI spec.

-- 

Best Regards,
Peter Chen