[PATCH RFC 05/15] mmc: sunxi: Support MMC_DDR52 timing modes

Chen-Yu Tsai wens at csie.org
Wed Jan 20 21:26:32 PST 2016


DDR transfer modes include UHS-1 DDR50 and MMC HS-DDR (or MMC_DDR52).
Consider MMC_DDR52 when setting clock delays.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 drivers/mmc/host/sunxi-mmc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 4bec87458317..b403a2433eec 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -687,7 +687,8 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
 		oclk_dly = host->clk_delays[SDXC_CLK_25M].output;
 		sclk_dly = host->clk_delays[SDXC_CLK_25M].sample;
 	} else if (rate <= 50000000) {
-		if (ios->timing == MMC_TIMING_UHS_DDR50) {
+		if (ios->timing == MMC_TIMING_UHS_DDR50 ||
+		    ios->timing == MMC_TIMING_MMC_DDR52) {
 			oclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].output;
 			sclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].sample;
 		} else {
@@ -762,7 +763,8 @@ static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	/* set ddr mode */
 	rval = mmc_readl(host, REG_GCTRL);
-	if (ios->timing == MMC_TIMING_UHS_DDR50)
+	if (ios->timing == MMC_TIMING_UHS_DDR50 ||
+	    ios->timing == MMC_TIMING_MMC_DDR52)
 		rval |= SDXC_DDR_MODE;
 	else
 		rval &= ~SDXC_DDR_MODE;
-- 
2.7.0.rc3




More information about the linux-arm-kernel mailing list