[PATCH v2 4/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl

[Andrew Lunn]

On Thu, Jan 21, 2016 at 12:33:55AM +0900, Roger Shimizu wrote:
> Make all leds initially to "off" state except power indicator, so pins below
> change from active_low to active_high:
>   - gpio-leds: "lswvl:red:alarm" pin
>   - gpio-leds: "lswvl:red:func" pin
>   - gpio-leds: "lswvl:amber:info" pin
>   - gpio-leds: "lswvl:blue:func" pin
>   - gpio-leds: "lswvl:blue:power" pin
>   - gpio-leds: "lswvl:red:hdderr{0,1}" pin

Hi Roger

So the comments want changes, but otherwise:

Reviewd-by: Andrew Lunn <andrew at lunn.ch>

Thanks
	Andrew

> 
> Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl")
> Signed-off-by: Roger Shimizu <rogershimizu at gmail.com>
> ---
>  arch/arm/boot/dts/kirkwood-lswvl.dts | 15 +++++++--------
>  1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
> index 28fd9abd7a57..20b6b0c8b3ec 100644
> --- a/arch/arm/boot/dts/kirkwood-lswvl.dts
> +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
> @@ -186,38 +186,37 @@
>  
>  		led at 1 {
>  			label = "lswvl:red:alarm";
> -			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 2 {
>  			label = "lswvl:red:func";
> -			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 3 {
>  			label = "lswvl:amber:info";
> -			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 4 {
>  			label = "lswvl:blue:func";
> -			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 5 {
>  			label = "lswvl:blue:power";
> -			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> -			default-state = "keep";
> +			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 6 {
>  			label = "lswvl:red:hdderr0";
> -			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
>  		};
>  
>  		led at 7 {
>  			label = "lswvl:red:hdderr1";
> -			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
> +			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
>  		};
>  	};
>  
> -- 
> 2.1.4
>