[PATCH v2 3/7] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl

[Roger Shimizu]

Make all leds initially to "off" state except power indicator, so pins below
change from active_low to active_high:
  - gpio-leds: "lswxl:red:func" pin
  - gpio-leds: "lswxl:red:hdderr{0,1}" pin

Fixes: e54e4b1b622e ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Signed-off-by: Roger Shimizu <rogershimizu at gmail.com>
---
 arch/arm/boot/dts/kirkwood-lswxl.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
index 0e93f6d19259..f4700a60065b 100644
--- a/arch/arm/boot/dts/kirkwood-lswxl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswxl.dts
@@ -206,18 +206,17 @@
 
 		led at 5 {
 			label = "lswxl:red:func";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		led at 6 {
 			label = "lswxl:red:hdderr0";
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		led at 7 {
 			label = "lswxl:red:hdderr1";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-- 
2.1.4