[PATCH 3/4] net: mvneta: mmc: get optional axi clk

[Jisheng Zhang]

Some platforms may provide more than one clk for the mvneta IP, for
example Marvell BG4CT provides "core" clk for the mac core, and
"axi" clk for the AXI bus logic. Obviously this "axi" clk also need to
be enabled. This patch adds this optional "axi" clk support.

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index aca0a73..6bb709a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -373,6 +373,8 @@ struct mvneta_port {
 
 	/* Core clock */
 	struct clk *clk;
+	/* AXI clock */
+	struct clk *clk_axi;
 	u8 mcast_count[256];
 	u16 tx_ring_size;
 	u16 rx_ring_size;
@@ -3615,6 +3617,10 @@ static int mvneta_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(pp->clk);
 
+	pp->clk_axi = devm_clk_get(&pdev->dev, "axi");
+	if (!IS_ERR(pp->clk_axi))
+		clk_prepare_enable(pp->clk_axi);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	pp->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(pp->base)) {
@@ -3727,6 +3733,7 @@ err_free_ports:
 	free_percpu(pp->ports);
 err_clk:
 	clk_disable_unprepare(pp->clk);
+	clk_disable_unprepare(pp->clk_axi);
 err_put_phy_node:
 	of_node_put(phy_node);
 err_free_irq:
@@ -3744,6 +3751,7 @@ static int mvneta_remove(struct platform_device *pdev)
 
 	unregister_netdev(dev);
 	clk_disable_unprepare(pp->clk);
+	clk_disable_unprepare(pp->clk_axi);
 	free_percpu(pp->ports);
 	free_percpu(pp->stats);
 	irq_dispose_mapping(dev->irq);
-- 
2.7.0.rc3