[PATCH V3 18/21] ACPI, PCI: Refine the way to handle translation_offset for ACPI resources

Lorenzo Pieralisi lorenzo.pieralisi at arm.com
Tue Jan 19 04:20:26 PST 2016


Gerry,

On Wed, Jan 13, 2016 at 02:21:04PM +0100, Tomasz Nowicki wrote:
> From: Liu Jiang <jiang.liu at linux.intel.com>
> 
> Some architectures, such as IA64 and ARM64, have no instructions to
> directly access PCI IO ports, so they map PCI IO ports into PCI MMIO
> address space. Typically PCI host bridges on those architectures take
> the responsibility to map (translate) PCI IO port transactions into
> Memory-Mapped IO transactions. ACPI specification provides support
> of such a usage case by using resource translation_offset.
> 
> But current ACPI resource parsing interface isn't neutral enough,
> it still has some special logic for IA64. So refine the ACPI resource
> parsing interface and IA64 code to neutrally handle translation_offset
> by:
> 1) ACPI resource parsing interface doesn't do any translation, it just
>    save the translation_offset to be used by arch code.
> 2) Arch code will do the mapping(translation) based on arch specific
>    information. Typically it does:
> 2.a) Translate per PCI domain IO port address space into system global
>    IO port address space.
> 2.b) Setup MMIO address mapping for IO ports.

This patch fixes IO space handling on IA64 and should go in as a fix.

IA64 PCI IO space is currently broken (Hanjun tested this on an IA64 box).

The first broken commit is:

3772aea7d6f3 ("ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge")

because acpi core code checks (in acpi_dev_ioresource_flags()) the
resource.end>=0x10003, which fails on ia64 - currently resource.end is
set in acpi_decode_space() to:

AddressMaximum + AddressTranslation

where AddressTranslation is the CPU physical address mapping IO space
on IA64, the >=0x10003 check in acpi_dev_ioresource_flags always
triggers and the IO resource is then disabled.

Do you want me to re-send this patch as a fix, with updated commit log ?

Thanks,
Lorenzo

> void handle_io_resource(struct resource_entry *io_entry)
> {
> 	struct resource *mmio_res;
> 
> 	mmio_res = kzalloc(sizeof(*mmio_res), GFP_KERNEL);
> 	mmio_res->flags = IORESOURCE_MEM;
> 	mmio_res->start = io_entry->offset + io_entry->res->start;
> 	mmio_res->end = io_entry->offset + io_entry->res->end;
> 	insert_resource(&iomem_resource, mmio_res)
> 
> 	base = map_to_system_ioport_address(entry);
> 	io_entry->offset = base;
> 	io_entry->res->start += base;
> 	io_entry->res->end += base;
> }
> 
> Signed-off-by: Jiang Liu <jiang.liu at linux.intel.com>
> ---
>  arch/ia64/pci/pci.c     | 26 ++++++++++++++++----------
>  drivers/acpi/resource.c | 12 +++++-------
>  2 files changed, 21 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
> index be4c9ef..c75356b 100644
> --- a/arch/ia64/pci/pci.c
> +++ b/arch/ia64/pci/pci.c
> @@ -154,7 +154,7 @@ static int add_io_space(struct device *dev, struct pci_root_info *info,
>  	struct resource_entry *iospace;
>  	struct resource *resource, *res = entry->res;
>  	char *name;
> -	unsigned long base, min, max, base_port;
> +	unsigned long base_mmio, base_port;
>  	unsigned int sparse = 0, space_nr, len;
>  
>  	len = strlen(info->common.name) + 32;
> @@ -172,12 +172,10 @@ static int add_io_space(struct device *dev, struct pci_root_info *info,
>  		goto free_resource;
>  
>  	name = (char *)(iospace + 1);
> -	min = res->start - entry->offset;
> -	max = res->end - entry->offset;
> -	base = __pa(io_space[space_nr].mmio_base);
> +	base_mmio = __pa(io_space[space_nr].mmio_base);
>  	base_port = IO_SPACE_BASE(space_nr);
>  	snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->common.name,
> -		 base_port + min, base_port + max);
> +		 base_port + res->start, base_port + res->end);
>  
>  	/*
>  	 * The SDM guarantees the legacy 0-64K space is sparse, but if the
> @@ -190,19 +188,27 @@ static int add_io_space(struct device *dev, struct pci_root_info *info,
>  	resource = iospace->res;
>  	resource->name  = name;
>  	resource->flags = IORESOURCE_MEM;
> -	resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min);
> -	resource->end   = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max);
> +	resource->start = base_mmio;
> +	resource->end = base_mmio;
> +	if (sparse) {
> +		resource->start += IO_SPACE_SPARSE_ENCODING(res->start);
> +		resource->end += IO_SPACE_SPARSE_ENCODING(res->end);
> +	} else {
> +		resource->start += res->start;
> +		resource->end += res->end;
> +	}
>  	if (insert_resource(&iomem_resource, resource)) {
>  		dev_err(dev,
>  			"can't allocate host bridge io space resource  %pR\n",
>  			resource);
>  		goto free_resource;
>  	}
> +	resource_list_add_tail(iospace, &info->io_resources);
>  
> +	/* Adjust base of original IO port resource descriptor */
>  	entry->offset = base_port;
> -	res->start = min + base_port;
> -	res->end = max + base_port;
> -	resource_list_add_tail(iospace, &info->io_resources);
> +	res->start += base_port;
> +	res->end += base_port;
>  
>  	return 0;
>  
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index cdc5c25..6578f68 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -190,8 +190,7 @@ static bool acpi_decode_space(struct resource_win *win,
>  {
>  	u8 iodec = attr->granularity == 0xfff ? ACPI_DECODE_10 : ACPI_DECODE_16;
>  	bool wp = addr->info.mem.write_protect;
> -	u64 len = attr->address_length;
> -	u64 start, end, offset = 0;
> +	u64 len = attr->address_length, offset = 0;
>  	struct resource *res = &win->res;
>  
>  	/*
> @@ -215,14 +214,13 @@ static bool acpi_decode_space(struct resource_win *win,
>  	else if (attr->translation_offset)
>  		pr_debug("ACPI: translation_offset(%lld) is invalid for non-bridge device.\n",
>  			 attr->translation_offset);
> -	start = attr->minimum + offset;
> -	end = attr->maximum + offset;
>  
>  	win->offset = offset;
> -	res->start = start;
> -	res->end = end;
> +	res->start = attr->minimum;
> +	res->end = attr->maximum;
>  	if (sizeof(resource_size_t) < sizeof(u64) &&
> -	    (offset != win->offset || start != res->start || end != res->end)) {
> +	    (offset != win->offset || attr->minimum != res->start ||
> +	     attr->maximum != res->end)) {
>  		pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",
>  			attr->minimum, attr->maximum);
>  		return false;
> -- 
> 1.9.1
> 



More information about the linux-arm-kernel mailing list