[PATCH 4/4] Input: rotary_encoder - move away from platform data structure
Dmitry Torokhov
dmitry.torokhov at gmail.com
Mon Jan 18 09:41:42 PST 2016
Drop support for platform data passed via a C-structure and switch to
device properties instead, which should make the driver compatible with all
platforms: OF, ACPI and static boards. Static boards should use property
sets to communicate device parameters to the driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov at gmail.com>
---
arch/arm/mach-pxa/raumfeld.c | 29 +++++--
drivers/input/misc/rotary_encoder.c | 147 ++++++++++++++----------------------
include/linux/rotary_encoder.h | 13 ----
3 files changed, 76 insertions(+), 113 deletions(-)
delete mode 100644 include/linux/rotary_encoder.h
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d156f79..c559114 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,13 +18,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/property.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/smsc911x.h>
#include <linux/input.h>
-#include <linux/rotary_encoder.h>
#include <linux/gpio_keys.h>
#include <linux/input/eeti_ts.h>
#include <linux/leds.h>
@@ -378,18 +378,27 @@ static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
},
};
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
- .steps = 24,
- .axis = REL_X,
- .relative_axis = 1,
+static u32 raumfeld_rotary_encoder_steps = 24;
+static u32 raumfeld_rotary_encoder_axis = REL_X;
+static u32 raumfeld_rotary_encoder_relative_axis = 1;
+
+static struct property_entry raumfeld_rotary_properties[] = {
+ { "rotary-encoder,steps-per-period",
+ DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, },
+ { "linux,axis",
+ DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, },
+ { "rotary-encoder,relative_axis", 1, },
+ DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, },
+ { NULL }
+};
+
+static struct property_entry raumfeld_rotary_property_set = {
+ .properties = raumfeld_rotary_properties,
};
static struct platform_device rotary_encoder_device = {
.name = "rotary-encoder",
.id = 0,
- .dev = {
- .platform_data = &raumfeld_rotary_encoder_info,
- }
};
/**
@@ -1061,6 +1070,8 @@ static void __init raumfeld_controller_init(void)
pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+ device_add_property_set(&rotary_encoder_device.dev,
+ &raumfeld_rotary_property_set);
platform_device_register(&rotary_encoder_device);
spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
@@ -1099,6 +1110,8 @@ static void __init raumfeld_speaker_init(void)
platform_device_register(&smc91x_device);
gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+ device_add_property_set(&rotary_encoder_device.dev,
+ &raumfeld_rotary_property_set);
platform_device_register(&rotary_encoder_device);
raumfeld_audio_init();
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 1882e65..309612a 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -21,20 +21,23 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
-#include <linux/rotary_encoder.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/pm.h>
+#include <linux/property.h>
#define DRV_NAME "rotary-encoder"
struct rotary_encoder {
struct input_dev *input;
- const struct rotary_encoder_platform_data *pdata;
+
struct mutex access_mutex;
- unsigned int axis;
+ u32 steps;
+ u32 axis;
+ bool relative_axis;
+ bool rollover;
+
unsigned int pos;
struct gpio_desc *gpio_a;
@@ -59,31 +62,29 @@ static int rotary_encoder_get_state(struct rotary_encoder *encoder)
static void rotary_encoder_report_event(struct rotary_encoder *encoder)
{
- const struct rotary_encoder_platform_data *pdata = encoder->pdata;
-
- if (pdata->relative_axis) {
+ if (encoder->relative_axis) {
input_report_rel(encoder->input,
- pdata->axis, encoder->dir ? -1 : 1);
+ encoder->axis, encoder->dir ? -1 : 1);
} else {
unsigned int pos = encoder->pos;
if (encoder->dir) {
/* turning counter-clockwise */
- if (pdata->rollover)
- pos += pdata->steps;
+ if (encoder->rollover)
+ pos += encoder->steps;
if (pos)
pos--;
} else {
/* turning clockwise */
- if (pdata->rollover || pos < pdata->steps)
+ if (encoder->rollover || pos < encoder->steps)
pos++;
}
- if (pdata->rollover)
- pos %= pdata->steps;
+ if (encoder->rollover)
+ pos %= encoder->steps;
encoder->pos = pos;
- input_report_abs(encoder->input, pdata->axis, encoder->pos);
+ input_report_abs(encoder->input, encoder->axis, encoder->pos);
}
input_sync(encoder->input);
@@ -204,91 +205,43 @@ out:
return IRQ_HANDLED;
}
-#ifdef CONFIG_OF
-static const struct of_device_id rotary_encoder_of_match[] = {
- { .compatible = "rotary-encoder", },
- { },
-};
-MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
-
-static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct device *dev)
-{
- const struct of_device_id *of_id =
- of_match_device(rotary_encoder_of_match, dev);
- struct device_node *np = dev->of_node;
- struct rotary_encoder_platform_data *pdata;
- enum of_gpio_flags flags;
- int error;
-
- if (!of_id || !np)
- return NULL;
-
- pdata = devm_kzalloc(dev, sizeof(struct rotary_encoder_platform_data),
- GFP_KERNEL);
- if (!pdata)
- return ERR_PTR(-ENOMEM);
-
- of_property_read_u32(np, "rotary-encoder,steps", &pdata->steps);
- of_property_read_u32(np, "linux,axis", &pdata->axis);
-
- pdata->relative_axis =
- of_property_read_bool(np, "rotary-encoder,relative-axis");
- pdata->rollover = of_property_read_bool(np, "rotary-encoder,rollover");
-
- error = of_property_read_u32(np, "rotary-encoder,steps-per-period",
- &pdata->steps_per_period);
- if (error) {
- /*
- * The 'half-period' property has been deprecated, you must use
- * 'steps-per-period' and set an appropriate value, but we still
- * need to parse it to maintain compatibility.
- */
- if (of_property_read_bool(np, "rotary-encoder,half-period")) {
- pdata->steps_per_period = 2;
- } else {
- /* Fallback to one step per period behavior */
- pdata->steps_per_period = 1;
- }
- }
-
- pdata->wakeup_source = of_property_read_bool(np, "wakeup-source");
-
- return pdata;
-}
-#else
-static inline struct rotary_encoder_platform_data *
-rotary_encoder_parse_dt(struct device *dev)
-{
- return NULL;
-}
-#endif
-
static int rotary_encoder_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- const struct rotary_encoder_platform_data *pdata = dev_get_platdata(dev);
struct rotary_encoder *encoder;
struct input_dev *input;
irq_handler_t handler;
+ u32 steps_per_period;
int err;
- if (!pdata) {
- pdata = rotary_encoder_parse_dt(dev);
- if (IS_ERR(pdata))
- return PTR_ERR(pdata);
-
- if (!pdata) {
- dev_err(dev, "missing platform data\n");
- return -EINVAL;
- }
- }
-
encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
if (!encoder)
return -ENOMEM;
mutex_init(&encoder->access_mutex);
- encoder->pdata = pdata;
+
+ device_property_read_u32(dev, "rotary-encoder,steps", &encoder->steps);
+
+ err = device_property_read_u32(dev, "rotary-encoder,steps-per-period",
+ &steps_per_period);
+ if (err) {
+ /*
+ * The 'half-period' property has been deprecated, you must
+ * use 'steps-per-period' and set an appropriate value, but
+ * we still need to parse it to maintain compatibility. If
+ * neither property is present we fall back to the one step
+ * per period behavior.
+ */
+ steps_per_period = device_property_read_bool(dev,
+ "rotary-encoder,half-period") ? 2 : 1;
+ }
+
+ encoder->rollover =
+ device_property_read_bool(dev, "rotary-encoder,rollover");
+
+ device_property_read_u32(dev, "linux,axis", &encoder->axis);
+ encoder->relative_axis =
+ device_property_read_bool(dev, "rotary-encoder,relative-axis");
encoder->gpio_a = devm_gpiod_get_index(dev, NULL, 0, GPIOD_IN);
if (IS_ERR(encoder->gpio_a)) {
@@ -318,12 +271,13 @@ static int rotary_encoder_probe(struct platform_device *pdev)
input->id.bustype = BUS_HOST;
input->dev.parent = dev;
- if (pdata->relative_axis)
- input_set_capability(input, EV_REL, pdata->axis);
+ if (encoder->relative_axis)
+ input_set_capability(input, EV_REL, encoder->axis);
else
- input_set_abs_params(input, pdata->axis, 0, pdata->steps, 0, 1);
+ input_set_abs_params(input,
+ encoder->axis, 0, encoder->steps, 0, 1);
- switch (pdata->steps_per_period) {
+ switch (steps_per_period) {
case 4:
handler = &rotary_encoder_quarter_period_irq;
encoder->last_stable = rotary_encoder_get_state(encoder);
@@ -337,7 +291,7 @@ static int rotary_encoder_probe(struct platform_device *pdev)
break;
default:
dev_err(dev, "'%d' is not a valid steps-per-period value\n",
- pdata->steps_per_period);
+ steps_per_period);
return -EINVAL;
}
@@ -363,7 +317,8 @@ static int rotary_encoder_probe(struct platform_device *pdev)
return err;
}
- device_init_wakeup(&pdev->dev, pdata->wakeup_source);
+ device_init_wakeup(dev,
+ device_property_read_bool(dev, "wakeup-source"));
platform_set_drvdata(pdev, encoder);
@@ -397,6 +352,14 @@ static int __maybe_unused rotary_encoder_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(rotary_encoder_pm_ops,
rotary_encoder_suspend, rotary_encoder_resume);
+#ifdef CONFIG_OF
+static const struct of_device_id rotary_encoder_of_match[] = {
+ { .compatible = "rotary-encoder", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
+#endif
+
static struct platform_driver rotary_encoder_driver = {
.probe = rotary_encoder_probe,
.driver = {
diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
deleted file mode 100644
index 4536c81..0000000
--- a/include/linux/rotary_encoder.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ROTARY_ENCODER_H__
-#define __ROTARY_ENCODER_H__
-
-struct rotary_encoder_platform_data {
- unsigned int steps;
- unsigned int axis;
- unsigned int steps_per_period;
- bool relative_axis;
- bool rollover;
- bool wakeup_source;
-};
-
-#endif /* __ROTARY_ENCODER_H__ */
--
2.6.0.rc2.230.g3dd15c0
More information about the linux-arm-kernel
mailing list