[RFC PATCH v2 0/4] CPUs capacity information for heterogeneous systems

[Juri Lelli]

Hi Steve,

On 15/01/16 11:50, Steve Muckle wrote:
> On 01/08/2016 06:09 AM, Juri Lelli wrote:
> >  2. Dynamic profiling at boot (v2)
> > 
> >     pros: - does not require a standardized definition of capacity
> >           - cannot be incorrectly tuned (once benchmark is fixed)
> >           - does not require user/integrator work
> > 
> >     cons: - not easy to come up with a clean solution, as it seems interaction
> >             with several subsystems (e.g., cpufreq) is required
> >           - not easy to agree upon a single benchmark (that has to be both
> >             representative and simple enough to run at boot)
> >           - numbers might (and do) vary from boot to boot
> 
> An important additional con that was mentioned earlier IIRC was the
> additional boot time required for the benchmark.

Right. I forgot about that.

> Perhaps there could be
> a kernel command line argument to bypass the benchmark if it is known
> that predetermined values will be provided via sysfs later?
> 

This might work, yes.

> Though there may be another issue with that as mentioned below.
> 
> >  3. sysfs (v1)
> > 
> >     pros: - clean and super easy to implement
> >           - values don't require to be physical properties, defining them is
> >             probably easier
> > 
> >     cons: - CPUs capacity have to be provided after boot (by some init script?)
> >           - API is modified, still some discussion/review is needed
> >           - values can still be incorrectly used for runtime tuning purposes
> 
> Initializing the values via userspace init will cause more of the boot
> process to run with incorrect CPU capacity values. Boot times may be
> increased with tasks running on suboptimal CPUs. Such increases may also
> not be deterministic.
> 
> Extending the kernel command line idea above, perhaps capacity values
> could be provided there as well, similar to the lpj parameter? That has
> scalability issues though if there's a huge highly heterogeneous platform...
> 

Yeah, adding such option is not difficult, but I'm also a bit concerned
about the scalability of such a thing.

> DT solves these issues and would be the perfect place for this - we are
> defining the compute capacity of a CPU which is a property of the
> hardware. However there are a couple things forcing us to compromise.
> One is that the amount and detail of information required to adequately
> capture the computational abilities of a CPU across all possible
> workloads seem onerous to collect and enumerate. The second is that even
> if we were willing to undertake that, CPU vendors probably won't be
> forthcoming with that information.
> 

You mean because they won't publish performance data of their hw?

But we already use per platform normalized values (as you are proposing
below). So that a platform to platform comparison doesn't make sense.

> Despite this DT still seems to me like the best way to go. At their
> heart these are properties of the hardware, even if we can't specify
> them as such per se because of the problems above. The capacity would
> have to be defined as a relative value among CPUs. And while it's true
> it may be abused for tuning purposes, that's true of any strategy.
> Certainly the sysfs strategy and even if only a dynamic option is
> provided, it is guaranteed to be hacked by platform vendors.

I also like the DT approach and consider the sysfs option as something
that can go together with any solution we want to adopt.

Best,

- Juri