[PATCH v4 08/14] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver

[Simon Horman]

Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.

Base on work for the r8a7791 by Kuninori Morimoto.

Cc: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

---
v2
* New patch
---
 arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 0766400caaf6..b95aa1ced90d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1172,8 +1172,9 @@
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x280>;  /* SSI */
-		reg-names = "scu", "adg", "ssiu", "ssi";
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 		clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
 			<&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
-- 
2.1.4