[PATCH v3 7/9] ARM: dts: rockchip: add the sdmmc for kylin board

[Heiko Stuebner]

Am Freitag, 15. Januar 2016, 21:49:54 schrieb Caesar Wang:
> Although We can add the sdmmc node, shouldn't enable it.
> Since the sdmmc is reusing the same pin with uart2.
> Unfortunately, the uart2 is used by the debug port, so that will cause
> the debug information can't display on console if enabling the sdmmc.
> 
> As we have supported the sdmmc (sd card) on hardware for kylin board.
> So, maybe we can have the sdmmc node in kylin dts, not to enable it.
> 
> Anyway, you only need add the okay status if someone want to enable the
> sdmmc.
> 
> e.g.
> if you use the adb to debug with android os.
> You can add the
> status = "okay" to enable the sdmmc for sd card working.
> The defauly status is disabling it.
> 
> Signed-off-by: Caesar Wang <wxt at rock-chips.com>

applied to my dts32 branch for 4.6


Thanks
Heiko