[PATCH v2 17/26] drm: sun4i: Add DT bindings documentation

[Rob Herring]

On Thu, Jan 14, 2016 at 04:25:00PM +0100, Maxime Ripard wrote:
> The display pipeline of the Allwinner A10 is involving several loosely
> coupled components.
> 
> Add a documentation for the bindings.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
>  .../bindings/display/sunxi/sun4i-drm.txt           | 228 +++++++++++++++++++++

drm is a linuxism. It shouldn't be used for binding doc.

>  1 file changed, 228 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> new file mode 100644
> index 000000000000..061bc87147a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
> @@ -0,0 +1,228 @@
> +Allwinner A10 Display Pipeline
> +==============================
> +
> +The Allwinner A10 Display pipeline is composed of several components
> +that are going to be documented below:
> +
> +TV Encoder
> +----------
> +
> +The TV Encoder supports the composite and VGA output. It is one end of
> +the pipeline.
> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
> + - reg: base address and size of memory-mapped region
> + - clocks: the clocks driving the TV encoder
> +
> +- ports: A ports node with endpoint definitions as defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt. The
> +  first port should be the input endpoint.
> +
> +TCON
> +----
> +
> +The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tcon".
> + - reg: base address and size of memory-mapped region
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the TCON. Three are needed:
> +   - 'ahb': the interface clocks
> +   - 'tcon-ch0': The clock driving the TCON channel 0
> +   - 'tcon-ch1': The clock driving the TCON channel 1
> +
> + - clock-names: the clock names mentioned above
> + - clock-output-names: Name of the pixel clock created
> +
> +- ports: A ports node with endpoint definitions as defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt. The
> +  first port should be the input endpoint, the second one the output
> +
> +Optional properties:
> +  - allwinner,panel: phandle to the panel used in our RGB interface
> +
> +
> +Display Engine Backend
> +----------------------
> +
> +The display engine backend exposes layers and sprites to the
> +system.
> +
> +Required properties:
> +  - compatible: value must be one of:
> +    * allwinner,sun5i-a13-display-backend
> +  - reg: base address and size of the memory-mapped region.
> +  - clocks: phandles to the clocks feeding the frontend and backend
> +    * ahb: the backend interface clock
> +    * mod: the backend module clock
> +    * ram: the backend DRAM clock
> +  - clock-names: the clock names mentioned above
> +  - resets: phandles to the reset controllers driving the backend
> +
> +- ports: A ports node with endpoint definitions as defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt. The
> +  first port should be the input endpoints, the second one the output
> +
> +Display Engine Frontend
> +-----------------------
> +
> +The display engine frontend does formats conversion, scaling,
> +deinterlacing and color space conversion.
> +
> +Required properties:
> +  - compatible: value must be one of:
> +    * allwinner,sun5i-a13-display-frontend
> +  - reg: base address and size of the memory-mapped region.
> +  - interrupts: interrupt associated to this IP
> +  - clocks: phandles to the clocks feeding the frontend and backend

> +    * ahb: the backend interface clock
> +    * mod: the backend module clock
> +    * ram: the backend DRAM clock

should be frontend?

> +  - clock-names: the clock names mentioned above
> +  - resets: phandles to the reset controllers driving the backend

ditto

> +
> +Display Engine Pipeline
> +-----------------------
> +
> +The display engine pipeline (and its entry point, since it can be
> +either directly the backend or the frontend) is represented as an
> +extra node.
> +
> +Required properties:
> +  - compatible: value must be one of:
> +    * allwinner,sun5i-a13-display-engine
> +  - allwinner,pipelines: list of phandle to the entry points of the
> +    pipelines (either to the frontend or backend)
> +
> +Example:
> +
> +panel: panel {
> +	compatible = "olimex,lcd-olinuxino-43-ts";

This should either be a child of what it is attached to or use of-graph.

> +};
> +
> +tve0: tv-encoder at 01c0a000 {
> +	compatible = "allwinner,sun4i-a10-tv-encoder";
> +	reg = <0x01c0a000 0x1000>;
> +	clocks = <&ahb_gates 34>;
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		tve0_in_tcon0: endpoint at 0 {
> +			reg = <0>;

I would drop the reg where you only have 1 node for ports or endpoints.

> +			remote-endpoint = <&tcon0_out_tve0>;
> +		};
> +	};
> +};
> +
> +tcon0: lcd-controller at 01c0c000 {
> +	compatible = "allwinner,sun4i-a10-tcon";
> +	reg = <0x01c0c000 0x1000>;
> +	interrupts = <44>;
> +	clocks = <&ahb_gates 36>,
> +		 <&tcon_ch0_clk>,
> +		 <&tcon_ch1_clk>;
> +	clock-names = "ahb",
> +		      "tcon-ch0",
> +		      "tcon-ch1";
> +	clock-output-names = "tcon-pixel-clock";
> +	allwinner,panel = <&panel>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		tcon0_in: port at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			tcon0_in_be0: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&be0_out_tcon0>;
> +			};
> +		};
> +
> +		tcon0_out: port at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			tcon0_out_tve0: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&tve0_in_tcon0>;
> +			};
> +		};
> +	};
> +};
> +
> +fe0: display-frontend at 01e00000 {
> +	compatible = "allwinner,sun5i-a13-display-frontend";
> +	reg = <0x01e00000 0x20000>;
> +	interrupts = <47>;
> +	clocks = <&ahb_gates 46>, <&de_fe_clk>,
> +		 <&dram_gates 25>;
> +	clock-names = "ahb", "mod",
> +		      "ram";
> +	resets = <&de_fe_clk>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		fe0_out: port at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			fe0_out_be0: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&be0_in_fe0>;
> +			};
> +		};
> +	};
> +};
> +
> +be0: display-backend at 01e60000 {
> +	compatible = "allwinner,sun5i-a13-display-backend";
> +	reg = <0x01e60000 0x10000>;
> +	clocks = <&ahb_gates 44>, <&de_be_clk>,
> +		 <&dram_gates 26>;
> +	clock-names = "ahb", "mod",
> +		      "ram";
> +	resets = <&de_be_clk>;
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		be0_in: port at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0>;
> +
> +			be0_in_fe0: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&fe0_out_be0>;
> +			};
> +		};
> +
> +		be0_out: port at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			be0_out_tcon0: endpoint at 0 {
> +				reg = <0>;
> +				remote-endpoint = <&tcon0_in_be0>;
> +		};
> +	};
> +};
> +
> +display-engine {
> +	compatible = "allwinner,sun5i-a13-display-engine";
> +	pipelines = <&be0>;
> +};
> -- 
> 2.6.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html