[PATCH v2 09/26] ARM: sun5i: dt: Add pll3 and pll7 clocks

[Maxime Ripard]

Enable the pll3 and pll7 clocks in the DT that are used to drive the
display-related clocks.

Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
Acked-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun5i.dtsi | 43 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 59a9426e3bd4..0840612b5ed6 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -88,6 +88,15 @@
 			clock-output-names = "osc24M";
 		};
 
+		osc3M: osc3M_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
 		osc32k: clk at 0 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -112,6 +121,23 @@
 					     "pll2-4x", "pll2-8x";
 		};
 
+		pll3: clk at 01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
 		pll4: clk at 01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -136,6 +162,23 @@
 			clock-output-names = "pll6_sata", "pll6_other", "pll6";
 		};
 
+		pll7: clk at 01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
 		/* dummy is 200M */
 		cpu: cpu at 01c20054 {
 			#clock-cells = <0>;
-- 
2.6.4