[PATCH] drm/rockchip: vop: fix mask when updating interrupts

Mark yao mark.yao at rock-chips.com
Wed Jan 13 00:12:08 PST 2016


On 2016年01月13日 02:05, John Keeping wrote:
> Commit dbb3d94 (drm/rockchip: vop: move interrupt registers into
> vop_data) introduced new macros for updating the interrupt control
> registers but these always use the mask from the register definition
> without refining it for the particular bits that are being changed.
>
> This means that whenever we enable/disable a particular interrupt we end
> up disabling all of the others as a side effect.
>
> Signed-off-by: John Keeping <john at metanate.com>
> ---
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 16 +++++++++-------
>   1 file changed, 9 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 46c2a8d..fd37054 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -43,8 +43,8 @@
>   
>   #define REG_SET(x, base, reg, v, mode) \
>   		__REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v)
> -#define REG_SET_MASK(x, base, reg, v, mode) \
> -		__REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v)
> +#define REG_SET_MASK(x, base, reg, mask, v, mode) \
> +		__REG_SET_##mode(x, base + reg.offset, mask, reg.shift, v)
>   
>   #define VOP_WIN_SET(x, win, name, v) \
>   		REG_SET(x, win->base, win->phy->name, v, RELAXED)
> @@ -58,16 +58,18 @@
>   #define VOP_INTR_GET(vop, name) \
>   		vop_read_reg(vop, 0, &vop->data->ctrl->name)
>   
> -#define VOP_INTR_SET(vop, name, v) \
> -		REG_SET(vop, 0, vop->data->intr->name, v, NORMAL)
> +#define VOP_INTR_SET(vop, name, mask, v) \
> +		REG_SET_MASK(vop, 0, vop->data->intr->name, mask, v, NORMAL)
>   #define VOP_INTR_SET_TYPE(vop, name, type, v) \
>   	do { \
> -		int i, reg = 0; \
> +		int i, reg = 0, mask = 0; \
>   		for (i = 0; i < vop->data->intr->nintrs; i++) { \
> -			if (vop->data->intr->intrs[i] & type) \
> +			if (vop->data->intr->intrs[i] & type) { \
>   				reg |= (v) << i; \
> +				mask |= 1 << i; \
> +			} \
>   		} \
> -		VOP_INTR_SET(vop, name, reg); \
> +		VOP_INTR_SET(vop, name, mask, reg); \
>   	} while (0)
>   #define VOP_INTR_GET_TYPE(vop, name, type) \
>   		vop_get_intr_type(vop, &vop->data->intr->name, type)
Hi John

Great, it works for me, Thanks for this fix.

Applied to my drm-next branch.

-- Mark Yao




More information about the linux-arm-kernel mailing list