[PATCH v5 5/6] mfd: dt-bindings: add device tree bindings for Hi3519 sysctrl
xuejiancheng
xuejiancheng at huawei.com
Tue Jan 12 01:28:05 PST 2016
On 2016/1/12 16:39, Lee Jones wrote:
> On Tue, 12 Jan 2016, xuejiancheng wrote:
>
>> Hello Lee,
>>
>> On 2016/1/12 15:41, Lee Jones wrote:
>>> On Tue, 12 Jan 2016, xuejiancheng wrote:
>>>
>>>>
>>>>
>>>> On 2016/1/11 16:55, Lee Jones wrote:
>>>>> On Mon, 11 Jan 2016, xuejiancheng wrote:
>>>>>> On 2016/1/11 13:48, Lee Jones wrote:
>>>>>>> On Fri, 08 Jan 2016, Jiancheng Xue wrote:
>>>>>>>
>>>>>>>> Add device tree bindings for Hi3519 system controller.
>>>>>>>>
>>>>>>>> Signed-off-by: Jiancheng Xue <xuejiancheng at huawei.com>
>>>>>>>> ---
>>>>>>>> Documentation/devicetree/bindings/mfd/hi3519.txt | 14 ++++++++++++++
>>>>>>>> 1 file changed, 14 insertions(+)
>>>>>>>> create mode 100644 Documentation/devicetree/bindings/mfd/hi3519.txt
>>>>>>>
>>>>>>> I have this patch, but none of the others in the set, thus I am
>>>>>>> lacking context.
>>>>>>>
>>>>>> I can forward other patches in the set to you. Thank you.
>>>>>>
>>>>>>>> diff --git a/Documentation/devicetree/bindings/mfd/hi3519.txt b/Documentation/devicetree/bindings/mfd/hi3519.txt
>>>>>>>> new file mode 100644
>>>>>>>> index 0000000..115c5be
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/Documentation/devicetree/bindings/mfd/hi3519.txt
>>>>>>>> @@ -0,0 +1,14 @@
>>>>>>>> +* Hisilicon Hi3519 System Controller Block
>>>>>>>> +
>>>>>>>> +This bindings use the following binding:
>>>>>>>> +Documentation/devicetree/bindings/mfd/syscon.txt
>>>>>>>> +
>>>>>>>> +Required properties:
>>>>>>>> +- compatible: "hisilicon,hi3519-sysctrl".
>>>>>>>> +- reg: the register region of this block
>>>>>>>> +
>>>>>>>> +Examples:
>>>>>>>> +sysctrl: system-controller at 12010000 {
>>>>>>>> + compatible = "hisilicon,hi3519-sysctrl", "syscon";
>>>>>>>> + reg = <0x12010000 0x1000>;
>>>>>>>> +};
>>>>>>>
>>>>>>> There is no requirement (nor want) for binding documents where the
>>>>>>> given device is simply using highly generic bindings. This just
>>>>>>> amounts to churn.
>>>>>>>
>>>>>> This block is specific for Hi3519 SOC, and may has its own driver.
>>>>>
>>>>> Does it have its own driver currently?
>>>>>
>>>> Not yet.
>>>> Arnd Bergmann and Rob Herring all suggested adding a specific compatible string
>>>> with the SOC name. This binding is just used for describing the compatible string now.
>>>> When more functions on hi3519 SOC are added later, the specific driver will be also
>>>> needed.
>>>
>>> Save this binding until it has more functionality. We here "I'll add
>>> to this later" all too often.
>>>
>>
>> In the hi3519.dtsi file, there is a system-controller device node described like below:
>> sysctrl: system-controller at 12010000 {
>> compatible = "hisilicon,hi3519-sysctrl", "syscon";
>> reg = <0x12010000 0x1000>;
>> };
>> Do you mean that I should remove "hisilicon,hi3519-sysctrl" and just use "syscon" as the
>> compatible string?
>
> Where is this compatible string _used_?
>
>> If I want to add "hisilicon,hi3519-sysctrl" for hi3519. where should I put this binding?
>> Could you give some suggestions? Thank you very much!
>
> If you're not using the compatible i.e. the device doesn't have its
> own driver yet, then there is no need to supply the binding at all, is
> there?
>
OK. Thank you.
>>>>>> So I think it's better to keep this binding.
>>>>>
>>>>
>>>
>>
>
More information about the linux-arm-kernel
mailing list