[PATCH 05/10] arm64: dts: r8a7795: Add pmu device nodes

[Dirk Behme]

On 11.01.2016 11:39, Mark Rutland wrote:
> On Sat, Jan 09, 2016 at 07:36:42AM +0100, Dirk Behme wrote:
>> On 18.12.2015 11:47, Sudeep Holla wrote:
>>>
>>>
>>> On 18/12/15 10:44, Dirk Behme wrote:
>>>> On 18.12.2015 11:16, Sudeep Holla wrote:
>>>>>
>>>>>
>>>>> On 18/12/15 02:29, Simon Horman wrote:
>>>>>> From: Yoshifumi Hosoya <yoshifumi.hosoya.wj at renesas.com>
>>>>>>
>>>>>> Enabling the performance monitor unit on r8a7795.
>>>>>>
>>>>>> Signed-off-by: Masaru Nagai <masaru.nagai.vx at renesas.com>
>>>>>> Signed-off-by: Yoshifumi Hosoya <yoshifumi.hosoya.wj at renesas.com>
>>>>>> Signed-off-by: Dirk Behme <dirk.behme at gmail.com>
>>>>>> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
>>>>>> ---
>>>>>>   arch/arm64/boot/dts/renesas/r8a7795.dtsi | 12 ++++++++++++
>>>>>>   1 file changed, 12 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>>>>>> b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>>>>>> index 4d43cf31418f..b9229a49dabc 100644
>>>>>> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>>>>>> @@ -230,6 +230,18 @@
>>>>>>               power-domains = <&cpg>;
>>>>>>           };
>>>>>>
>>>>>> +        pmu {
>>>>>> +            compatible = "arm,armv8-pmuv3";
>>>>>
>>>>> Please use arm,cortex-a57-pmu to be more specific. IIRC I mentioned
>>>>> this
>>>>> for some shmobile platform recently.
>>>>
>>>>
>>>> Yes. But as this patch has been applied already to some branches, I
>>>> incorporated your a57-pmu hint with an additional update patch:
>>>>
>>>> http://marc.info/?l=linux-sh&m=145011467914857
>>>>
>>>> Feel free to squash if still possible.
>>>>
>>>
>>> Ah OK, I didn't know the exact dts name, sorry for the noise.
>>> Better if it was posted as part of this series :)
>>
>>
>> I finally found some time to test this
>>
>> http://marc.info/?l=linux-sh&m=145011467914857
>>
>> and surprisingly it doesn't seem to work:
>>
>> Using "arm,cortex-a57-pmu" results in
>>
>> hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters
>> available
>
> This means all the probing logic worked for the A57 PMU.
>
>> hw perfevents: failed to probe PMU!
>> hw perfevents: failed to register PMU devices!
>
> These are printed in arm_pmu_device_probe, and following the logic we
> must have succesfully allocated the struct pmu, but failed in either
> of_pmu_irq_cfg or init_fn (AKA armv8_a53_pmu_init).
>
> In armv8_a53_pmu_init we call armv8pmu_probe_num_events, which will try
> to SMP cross-call to an A53 core to probe the number of countesr
> implemented. Perhaps the cross-call is failing.
>
> Were the A53s online at this point?


Ah, indeed, the A53s failed to run.

Maybe anything like

http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/398773.html

helps to make this more obvious, then?

Thanks!

Best regards

Dirk