[PATCH v1 3/3] ARM64 LPC: update binding doc
Rongrong Zou
zourongrong at gmail.com
Sun Jan 10 05:38:22 PST 2016
在 2016/1/10 17:29, Rolland Chau 写道:
> On 2016/1/5 20:19, Arnd Bergmann wrote:
>> On Tuesday 05 January 2016 19:59:49 Rongrong Zou wrote:
>>> 在 2016/1/5 0:34, Arnd Bergmann 写道:
>>>> On Tuesday 05 January 2016 00:04:19 Rongrong Zou wrote:
>>>>> 在 2016/1/4 19:13, Arnd Bergmann 写道:
>>>>>> On Sunday 03 January 2016 20:24:14 Rongrong Zou wrote:
>>>>>>> 在 2015/12/31 23:00, Rongrong Zou 写道:
>>>>> Ranges property can set empty, but this means 1:1 translation. the I/O
>>>>> port range is translated to MMIO address 0x00000001 00000000 to
>>>>> 0x00000001 00000004, it looks wrong else. I wonder if anyone get
>>>>> legacy
>>>>> I/O port resource from dts.
>>>>
>>>> As I said, nothing should really require the ranges property here,
>>>> unless
>>>> you have a valid IORESOURCE_MEM translation. The code that requires
>>>> the ranges to be present is wrong.
>>>>
>>>
>>> I think the openfirmware(DT) do not support for those unmapped I/O
>>> ports, because I
>>> must get resource by calling of_address_to_resource(), which have to
>>> call
>>> pci_address_to_pio() when resource type is IORESOURCE_IO. I'm sorry I
>>> have no
>>> better idea for this now. Maybe liviu can give me some opinions.
>>
>> I think on x86 it works (or used to work, few people use open firmware on
>> x86 these days, and it may be broken), and the pci_address_to_pio() call
>> behaves differently when PCI_IOBASE is set. x86 never maps I/O ports into
>> memory mapped I/O addresses, they have their own way of accessing them
>> just like your platform.
>>
>>> /**
>>> * of_address_to_resource - Translate device tree address and
>>> return as resource
>>> *
>>> * Note that if your address is a PIO address, the conversion will
>>> fail if
>>> * the physical address can't be internally converted to an IO
>>> token with
>>> * pci_address_to_pio(), that is because it's either called to
>>> early or it
>>> * can't be matched to any host bridge IO space
>>> */
>>> int of_address_to_resource(struct device_node *dev, int index,
>>> struct resource *r)
>>
>> The problem here seems to be that the code assumes that either the I/O
>> ports
>> are always mapped or they are never mapped (no PCI_IOBASE). We need to
>> extend
>> it because now we can have the combination of the two.
>
>
> Arnd , please take a look at the new solution when you have a
> moment,thanks.
> I modify the "drivers/of/address.c" to address the problem above.
>
> There are some assumptions:
>
> 1) ISA(LPC) Like bus must be scanned before PCI.
> 2) a property "unmapped-size" is introduced to ISA bus DT config, it
> means the address
> range of the bus. if bus-A have a port range(0-99), bus-B have a port
> range(0-199), then
> the cpu port range (0-99) is reserved for bus-A and cpu port range (100, 299) is
> reserved for bus-B.
> 3) It it
I sorry, I made a mistake, please ignore 3). And I added the cpu port
range(100, 299) for bus-B.
> ---
> drivers/of/address.c | 76
> +++++++++++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 70 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 9582c57..d3c71e5 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -682,8 +682,16 @@ struct io_range {
>
> static LIST_HEAD(io_range_list);
> static DEFINE_SPINLOCK(io_range_lock);
> +phy_addr_t pci_pio_start = 0;
> +EXPORT_SYMBOL(pci_pio_start)
> #endif
>
> +int isa_register_unmapped_io_range(resource_size_t size)
> +{
> + pci_pio_start += size;
> +}
> +
> +
> /*
> * Record the PCI IO range (expressed as CPU physical address + size).
> * Return a negative value if an error has occured, zero otherwise
> @@ -694,7 +702,7 @@ int __weak pci_register_io_range(phys_addr_t addr,
> resource_size_t size)
>
> #ifdef PCI_IOBASE
> struct io_range *range;
> - resource_size_t allocated_size = 0;
> + resource_size_t allocated_size = pci_pio_start;
>
> /* check if the range hasn't been previously recorded */
> spin_lock(&io_range_lock);
> @@ -743,7 +751,7 @@ phys_addr_t pci_pio_to_address(unsigned long pio)
>
> #ifdef PCI_IOBASE
> struct io_range *range;
> - resource_size_t allocated_size = 0;
> + resource_size_t allocated_size = pci_pio_start;
>
> if (pio > IO_SPACE_LIMIT)
> return address;
> @@ -766,7 +774,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t
> address)
> {
> #ifdef PCI_IOBASE
> struct io_range *res;
> - resource_size_t offset = 0;
> + resource_size_t offset = pci_pio_start;
> unsigned long addr = -1;
>
> spin_lock(&io_range_lock);
> @@ -788,21 +796,77 @@ unsigned long __weak
> pci_address_to_pio(phys_addr_t address)
> #endif
> }
>
> +static u64 of_get_unmapped_pio(struct device_node *dev, const __be32
> *inaddr)
> +{
> + struct device_node *np, *parent = NULL;
> + struct of_bus * bus, *pbus;
> + struct property *p_property;
> + int rlen;
> + u32 size = 0;
> + u32 port_base = 0;
> +
> + /*IF NOT I/O port*/
> + if(*(in_addr) != 0x01)
> + return OF_BAD_ADDR;
> + else
> + *in_addr = 0;
> +
> + parent = of_get_parent(dev);
> + if(parent == NULL)
> + return result;
> + bus = of_match_bus(parent);
> + if(!strcmp(bus->name, "isa")) {
> + p_property = of_find_property(parent, "ranges", &rlen);
> + /*no ranges property, this is a non-bridged isa bus, and
> the port on it is unmapped*/
> + if(p_property == NULL) {
> + for_each_node_by_name(np, "isa") {
> + if((np != parent) &&
> + !of_find_property(parent, "ranges",
> &rlen) &&
> + !of_property_read_u32(parent,
> "unmapped-size", &size)) {
> + port_base += size;
> + }
> + else if (np == parent) {
> + of_bus_default_translate(in_addr
> + 1, port_base, 1);
> + break;
> + }
> + else {
> + continue;
> + }
> + }
> + return of_read_number(in_addr, 2);
> +
> + }
> +
> + }
> + return OF_BAD_ADDR;
> +}
> +
> static int __of_address_to_resource(struct device_node *dev,
> const __be32 *addrp, u64 size, unsigned int flags,
> const char *name, struct resource *r)
> {
> u64 taddr;
> + u8 addr_type = 0;
>
> if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
> return -EINVAL;
> taddr = of_translate_address(dev, addrp);
> - if (taddr == OF_BAD_ADDR)
> - return -EINVAL;
> + if (taddr == OF_BAD_ADDR) {
> +
> + taddr == of_get_unmapped_pio(dev, addrp);
> + if(taddr == OF_BAD_ADDR)
> + return -EINVAL
> + else /*we get unmapped I/O port successfully*/
> + addr_type = 1;
> + }
> +
> memset(r, 0, sizeof(struct resource));
> if (flags & IORESOURCE_IO) {
> unsigned long port;
> - port = pci_address_to_pio(taddr);
> + if(!addr_type)
> + port = pci_address_to_pio(taddr);
> + else
> + port = (unsigned long)taddr;
> if (port == (unsigned long)-1)
> return -EINVAL;
> r->start = port;
More information about the linux-arm-kernel
mailing list