[PATCH 2/2] memory: omap-gpmc: Add Kconfig option for debug

[Tony Lindgren]

* Pali Rohár <pali.rohar at gmail.com> [160107 23:57]:
> On Thursday 07 January 2016 18:26:20 Tony Lindgren wrote:
> > > The problem is that between NOLO and kernel there is u-boot. And even if I
> > > am almost sure it doesn't touch onenand configs, I can't be absolutely sure.
> > > So those timings are not 100% reliable IMO, though close to that.
> > 
> > Hmm yes I'm only booting with u-boot here as my device sits in my rack.
> 
> U-boot try to configure N900 device similar like (some older version of)
> linux kernel. So testing these bugs should be done also directly from
> NOLO without U-boot.

OK

> Btw, if you have usb connection to your device in your rack, you can use
> 0xFFFF tool (open source) which can send kernel image to NOLO which will
> boot it without flashing NAND.
> 
> https://github.com/pali/0xFFFF
> 
> Original Nokia flasher-3.5 could support also serial connection (not
> only usb), but do not know. I have never used serial connector on my
> N900, so I do not know and this is reason why also 0xFFFF has no serial
> support...

Yup I'm using 0xFFFF for loading images on 770 and n800 here. Well once
I get my rack put together again over next few days..

Regards,

TOny