[PATCH v2 04/12] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out

[Caesar Wang]

Heiko,

在 2016年01月07日 18:05, Heiko Stuebner 写道:
> Hi Caesar,
>
> Am Donnerstag, 7. Januar 2016, 16:25:47 schrieb Caesar Wang:
>> SCLk_I2S_OUT is the noc bus clock for i2s module, this clock is used by
>> extra codecs.
>>
>> Due to it shouldn't belong to any driver, but we need it enabled,
>> so just mark it as the CLK_IGNORE_UNUSED flag.
> What makes you think it shouldn't belong to any driver?
>
> In most schematics I have, i2s_clkout is going to some clock-input of the
> audio codec - probably the MCLK input on your rt5616. And while the new
> rt5616 driver does not seem to do clock handling, it should just handle the
> clock using the normal APIs.

You are right,  that's seem has to find the root cause.
I'm wonder that the codec/i2s is working in kernel v4.1 patch without it.

In general,  the MLCK will be handled in i2s driver if the cpu side is 
master.

>
>
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


-- 
Thanks,
Caesar