[PATCH v2 13/13] arm64: efi: invoke EFI_RNG_PROTOCOL to supply KASLR randomness
Mark Rutland
mark.rutland at arm.com
Thu Jan 7 10:46:45 PST 2016
Hi Ard,
I had a go at testing this on Juno with a hacked-up PRNG, and while
everything seems to work, I think we need to make the address selection
more robust to sparse memory maps (which I believe they are going to be
fairly common).
Info dump below and suggestion below.
Other than that, this looks really nice -- I'll do other review in a
separate reply.
On Wed, Dec 30, 2015 at 04:26:12PM +0100, Ard Biesheuvel wrote:
> Since arm64 does not use a decompressor that supplies an execution
> environment where it is feasible to some extent to provide a source of
> randomness, the arm64 KASLR kernel depends on the bootloader to supply
> some random bits in register x1 upon kernel entry.
>
> On UEFI systems, we can use the EFI_RNG_PROTOCOL, if supplied, to obtain
> some random bits. At the same time, use it to randomize the offset of the
> kernel Image in physical memory.
>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
> ---
> arch/arm64/kernel/efi-entry.S | 7 +-
> drivers/firmware/efi/libstub/arm-stub.c | 1 -
> drivers/firmware/efi/libstub/arm64-stub.c | 134 +++++++++++++++++---
> include/linux/efi.h | 5 +-
> 4 files changed, 127 insertions(+), 20 deletions(-)
[...]
> @@ -36,13 +106,42 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
> if (preferred_offset < dram_base)
> preferred_offset += SZ_2M;
>
> - /* Relocate the image, if required. */
> kernel_size = _edata - _text;
> - if (*image_addr != preferred_offset) {
> - kernel_memsize = kernel_size + (_end - _edata);
> + kernel_memsize = kernel_size + (_end - _edata);
> +
> + if (IS_ENABLED(CONFIG_ARM64_RELOCATABLE_KERNEL) && efi_rnd.phys_seed) {
> + /*
> + * If KASLR is enabled, and we have some randomness available,
> + * locate the kernel at a randomized offset in physical memory.
> + */
> + u64 dram_top = dram_base;
> +
> + status = get_dram_top(sys_table_arg, &dram_top);
> + if (status != EFI_SUCCESS) {
> + pr_efi_err(sys_table_arg, "get_dram_size() failed\n");
> + return status;
> + }
> +
> + kernel_memsize += SZ_2M;
> + nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) /
> + EFI_PAGE_SIZE;
>
> /*
> - * First, try a straight allocation at the preferred offset.
> + * Use the random seed to scale the size and add it to the DRAM
> + * base. Note that this may give suboptimal results on systems
> + * with discontiguous DRAM regions with large holes between them.
> + */
> + *reserve_addr = dram_base +
> + ((dram_top - dram_base) >> 16) * (u16)efi_rnd.phys_seed;
I think that "suboptimal" is somewhat an understatement. Across 10
consecutive runs I ended up getting the same address 7 times:
EFI stub: Seed is 0x0a82016804fdc064
EFI stub: KASLR reserve address is 0x0000000832c48000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x0a820168050c09b2
EFI stub: KASLR reserve address is 0x00000000c59e0000
EFI stub: Loading kernel to physical address 0x00000000c4e80000 *
EFI stub: Seed is 0x0a8001680511c701
EFI stub: KASLR reserve address is 0x00000007feb40000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x0a8001680094d2a2
EFI stub: KASLR reserve address is 0x0000000895bd0000
EFI stub: Loading kernel to physical address 0x0000000895080000 *
EFI stub: Seed is 0x88820167ea986527
EFI stub: KASLR reserve address is 0x00000000bc570000
EFI stub: Loading kernel to physical address 0x00000000bb880000 *
EFI stub: Seed is 0x0882116805029414
EFI stub: KASLR reserve address is 0x00000005955a0000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x8a821168050104ab
EFI stub: KASLR reserve address is 0x0000000639600000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x08820168050671c6
EFI stub: KASLR reserve address is 0x00000005250f0000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x08821167ea67381f
EFI stub: KASLR reserve address is 0x000000080e538000
EFI stub: Loading kernel to physical address 0x00000000fe080000
EFI stub: Seed is 0x0a801168050cb810
EFI stub: KASLR reserve address is 0x00000006b20e0000
EFI stub: Loading kernel to physical address 0x00000000fe080000
My "Seed" here is just the CNTVCT value, with phys_seed being a xor of
each of the 16 bit chunks (see diff at the end of hte email). Judging by
the reserve addresses, I don't think the PRNG is to blame -- it's just
that that gaps are large relative to the available RAM and swallow up
much of the entropy, forcing a fall back to the same address.
One thing we could do is to perform the address selection in the space
of available memory, excluding gaps entirely. i.e. sum up the available
memory, select the Nth available byte, then walk the memory map to
convert that back to a real address. We might still choose an address
that cannot be used (e.g. if the kernel would hang over the end of a
region), but it'd be rarer than hitting a gap.
Thoughts?
For the above, my EFI memory map looks like:
[ 0.000000] Processing EFI memory map:
[ 0.000000] 0x000008000000-0x00000bffffff [Memory Mapped I/O |RUN| | | | | | | | | |UC]
[ 0.000000] 0x00001c170000-0x00001c170fff [Memory Mapped I/O |RUN| | | | | | | | | |UC]
[ 0.000000] 0x000080000000-0x00008000ffff [Loader Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x000080010000-0x00009fdfffff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x00009fe00000-0x00009fe0ffff [Loader Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x00009fe10000-0x0000dfffffff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0000e00f0000-0x0000fde49fff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0000fde4a000-0x0000febc9fff [Loader Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0000febca000-0x0000febcdfff [ACPI Reclaim Memory| | | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0000febce000-0x0000febcefff [ACPI Memory NVS | | | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0000febcf000-0x0000febd0fff [ACPI Reclaim Memory| | | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0000febd1000-0x0000feffffff [Boot Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x000880000000-0x0009f98aafff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009f98ab000-0x0009f98acfff [Loader Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009f98ad000-0x0009fa42afff [Loader Code | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009fa42b000-0x0009faf6efff [Boot Code | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009faf6f000-0x0009fafa9fff [Runtime Data |RUN| | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0009fafaa000-0x0009ff767fff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009ff768000-0x0009ff768fff [Boot Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009ff769000-0x0009ff76efff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009ff76f000-0x0009ffdddfff [Boot Data | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009ffdde000-0x0009ffe72fff [Conventional Memory| | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009ffe73000-0x0009fff6dfff [Boot Code | | | | | | | |WB|WT|WC|UC]
[ 0.000000] 0x0009fff6e000-0x0009fffaefff [Runtime Code |RUN| | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0009fffaf000-0x0009ffffefff [Runtime Data |RUN| | | | | | |WB|WT|WC|UC]*
[ 0.000000] 0x0009fffff000-0x0009ffffffff [Boot Data | | | | | | | |WB|WT|WC|UC]
I've included my local hacks below in case they are useful.
Thanks,
Mark.
---->8----
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
index 27a1a92..00c6640 100644
--- a/drivers/firmware/efi/libstub/arm64-stub.c
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -30,6 +30,34 @@ extern struct {
extern bool kaslr;
+static void log_hex(efi_system_table_t *sys_table_arg, unsigned long val)
+{
+ const char hex[16] = "0123456789abcdef";
+ char *strp, str[] = "0x0000000000000000";
+ strp = str + 18;
+
+ do {
+ *(--strp) = hex[val & 0xf];
+ } while (val >>= 4);
+
+ efi_printk(sys_table_arg, str);
+}
+
+static void dodgy_get_random_bytes(efi_system_table_t *sys_table)
+{
+ u64 seed;
+ pr_efi(sys_table, "using UNSAFE NON-RANDOM number generator\n");
+
+ asm volatile("mrs %0, cntvct_el0\n" : "=r" (seed));
+
+ pr_efi(sys_table, "Seed is ");
+ log_hex(sys_table, seed);
+ efi_printk(sys_table, "\n");
+
+ efi_rnd.virt_seed = seed;
+ efi_rnd.phys_seed = seed ^ (seed >> 16) ^ (seed >> 32) ^ (seed >> 48);
+}
+
static int efi_get_random_bytes(efi_system_table_t *sys_table)
{
efi_guid_t rng_proto = EFI_RNG_PROTOCOL_GUID;
@@ -40,6 +68,7 @@ static int efi_get_random_bytes(efi_system_table_t *sys_table)
(void **)&rng);
if (status == EFI_NOT_FOUND) {
pr_efi(sys_table, "EFI_RNG_PROTOCOL unavailable, no randomness supplied\n");
+ dodgy_get_random_bytes(sys_table);
return EFI_SUCCESS;
}
@@ -77,6 +106,17 @@ static efi_status_t get_dram_top(efi_system_table_t *sys_table_arg, u64 *top)
return EFI_SUCCESS;
}
+static void log_kernel_address(efi_system_table_t *sys_table_arg,
+ unsigned long addr, unsigned long kaslr_addr)
+{
+ pr_efi(sys_table_arg, "KASLR reserve address is ");
+ log_hex(sys_table_arg, kaslr_addr);
+ efi_printk(sys_table_arg, "\n");
+ pr_efi(sys_table_arg, "Loading kernel to physical address ");
+ log_hex(sys_table_arg, addr);
+ efi_printk(sys_table_arg, "\n");
+}
+
efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
unsigned long *image_addr,
unsigned long *image_size,
@@ -90,6 +130,7 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
unsigned long nr_pages;
void *old_image_addr = (void *)*image_addr;
unsigned long preferred_offset;
+ unsigned long kaslr_address = 0;
if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
if (kaslr) {
@@ -137,8 +178,9 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
* base. Note that this may give suboptimal results on systems
* with discontiguous DRAM regions with large holes between them.
*/
- *reserve_addr = dram_base +
+ kaslr_address = dram_base +
((dram_top - dram_base) >> 16) * (u16)efi_rnd.phys_seed;
+ *reserve_addr = kaslr_address;
status = efi_call_early(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
EFI_LOADER_DATA, nr_pages,
@@ -179,6 +221,9 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
}
*image_addr = *reserve_addr + TEXT_OFFSET;
}
+
+ log_kernel_address(sys_table_arg, *image_addr, kaslr_address);
+
memcpy((void *)*image_addr, old_image_addr, kernel_size);
*reserve_size = kernel_memsize;
More information about the linux-arm-kernel
mailing list