[PATCH v2 01/12] ARM: dts: rockchip: set the pinctrl default setting for rk3036 i2s

[Caesar Wang]

Sometime will hang if you set the i2s pinctrl as the none setting.
Let's set the pinctrl as the default setting to enable the gpio up/down.

Signed-off-by: Caesar Wang <wxt at rock-chips.com>

---

Changes in v2:
- modify the commit.

 arch/arm/boot/dts/rk3036.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..8f1bb0f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -579,12 +579,12 @@
 
 		i2s {
 			i2s_bus: i2s-bus {
-				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
-						<1 1 RK_FUNC_1 &pcfg_pull_none>,
-						<1 2 RK_FUNC_1 &pcfg_pull_none>,
-						<1 3 RK_FUNC_1 &pcfg_pull_none>,
-						<1 4 RK_FUNC_1 &pcfg_pull_none>,
-						<1 5 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+						<1 1 RK_FUNC_1 &pcfg_pull_default>,
+						<1 2 RK_FUNC_1 &pcfg_pull_default>,
+						<1 3 RK_FUNC_1 &pcfg_pull_default>,
+						<1 4 RK_FUNC_1 &pcfg_pull_default>,
+						<1 5 RK_FUNC_1 &pcfg_pull_default>;
 			};
 		};
 
-- 
1.9.1