[PATCH] doc: PCI: altera: Fix the 'ranges' property in example

[Marek Vasut]

On Tuesday, January 05, 2016 at 01:45:45 AM, Ley Foon Tan wrote:
> On Mon, 2016-01-04 at 02:12 +0100, Marek Vasut wrote:
> > On Monday, January 04, 2016 at 01:53:22 AM, Ley Foon Tan wrote:
> > > On Mon, 2016-01-04 at 01:37 +0100, Marek Vasut wrote:
> > > > On Monday, January 04, 2016 at 01:10:13 AM, Ley Foon Tan wrote:
> > > > 
> > > > Hi!
> > > > 
> > > > > > > > Well, do you have a good explanation why the system works
> > > > > > > > with this change and doesn't work without it on my design ?
> > > > > > > > I'd really love to understand this.
> > > > > > > 
> > > > > > > Do you modify the driver to setup the translation table?
> > > > > > 
> > > > > > No, I didn't change the driver. What do you refer to please ?
> > > > > 
> > > > > There is Address Translation Table at address offset 0x1000 in the
> > > > > IP.
> > > > 
> > > > Oh, I didn't configure that in any way. Should I or does the driver
> > > > configure it in some way?
> > > > 
> > > > > Do you use the hardware design from the rocketboards.org or your
> > > > > own design?
> > > > 
> > > > I use the one from rocketboards, I just ported it over to the MCVEVK
> > > > (custom cyclone v soc board)
> > > 
> > > You may check again the base addresses use in the MCVEVK board.
> > 
> > The address map is attached ; I don't see anything which would differ
> > from the reference design.
> 
> Address map looks fine.

Well do you have any other idea then ? I guess I should pull out the SOCDK, huh?

> > btw I am honestly surprised that Quartus cannot export the address map
> > into some text file :-(
> 
> There is a *.html file in the generated directory.

Oh, I didn't know that, thanks!

Best regards,
Marek Vasut