[PATCH] doc: PCI: altera: Fix the 'ranges' property in example

[Marek Vasut]

On Monday, January 04, 2016 at 01:53:22 AM, Ley Foon Tan wrote:
> On Mon, 2016-01-04 at 01:37 +0100, Marek Vasut wrote:
> > On Monday, January 04, 2016 at 01:10:13 AM, Ley Foon Tan wrote:
> > 
> > Hi!
> > 
> > > > > > Well, do you have a good explanation why the system works with
> > > > > > this change and doesn't work without it on my design ? I'd
> > > > > > really love to understand this.
> > > > > 
> > > > > Do you modify the driver to setup the translation table?
> > > > 
> > > > No, I didn't change the driver. What do you refer to please ?
> > > 
> > > There is Address Translation Table at address offset 0x1000 in the IP.
> > 
> > Oh, I didn't configure that in any way. Should I or does the driver
> > configure it in some way?
> > 
> > > Do you use the hardware design from the rocketboards.org or your own
> > > design?
> > 
> > I use the one from rocketboards, I just ported it over to the MCVEVK
> > (custom cyclone v soc board)
> 
> You may check again the base addresses use in the MCVEVK board.

The address map is attached ; I don't see anything which would differ from the 
reference design.

btw I am honestly surprised that Quartus cannot export the address map into some 
text file :-(

Best regards,
Marek Vasut
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pci.png
Type: image/png
Size: 69924 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160104/18c61804/attachment-0001.png>