[PATCH v4 0/6] watchdog: pnx4008: add restart handler

[Sylvain Lemieux]

On Fri, 2016-02-26 at 07:47 -0800, Guenter Roeck wrote:
> On 02/26/2016 07:34 AM, Sylvain Lemieux wrote:
> > On Fri, 2016-02-26 at 06:36 -0800, Guenter Roeck wrote:
> >> On 02/25/2016 10:31 AM, Sylvain Lemieux wrote:
> >>> From: Sylvain Lemieux <slemieux at tycoint.com>
> >>>
> >>> The LPC32xx provide the capability to perform a soft or hard reset;
> >>> a soft reset will no reset the external peripheral
> >>> (i.e. RESOUT_N output not asserted).
> >>>
> >>> This changeset migrate the restart code from the "mach-lpc32xx" to
> >>> the "pnx-4008" watchdog driver and add the soft reset capability.
> >>>
> >>> The default behavior (i.e. hard reset) remain unchanged.
> >>>
> >>> The core restart handler support added by this change:
> >>> 2165bf524da5f5e496d - "watchdog: core: add restart handler support"
> >>> is not use in this changeset; it does not support the reboot mode.
> >>
> >> I finally had the time to look into this. Sorry for the late reply.
> >>
> >> Changing the watchdog core to pass the restart mode (or action)
> >> and the cmd/data pointer to the driver would be trivial and should
> >> be done instead.
> >>
> > Thanks for the feedback.
> >
> > Do you want me to rebase this patchset on the patch you will submit
> > to update the core restart handler support?
> >
> 
> Yes, please. I'll Cc: you on it.
> 
> If you want to get started early and are open to do some early testing,
> try cloning git://kerneltests.org/git/linux.git. You'll find the patch
> in branch 'testing'.
> 
Rebase and tested on a custom LPC32xx board.

> Thanks,
> Guenter
>