[PATCH] arm64: dts: Add tmu node for exynos7

[Alim Akhtar]

Hi Lukasz,

On 02/25/2016 02:28 PM, Lukasz Majewski wrote:
> Hi pankaj.dubey,
>
>> Hi Krzysztof,
>>
>> On Thursday 25 February 2016 09:36 AM, Krzysztof Kozlowski wrote:
>>> On 25.02.2016 12:27, Pankaj Dubey wrote:
>>>> From: Alim Akhtar <alim.akhtar at samsung.com>
>>>>
>>>> This patch adds tmu node, related temprature sensor and triping
>>>> point data for Atlas cpu core found on exynos7 SoC.
>>>>
>>>> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
>>>
>>> Yours Sob is missing.
>>>
>>> Cc-ed Lukasz Majewski.
>>>
>>
>> Due to some technical difficulty Alim posted via my account. He will
>> re-spin this patch via his account soon.
>
> Looking forward to see your patches. :-)
>
I have resend the patch..please review.
Thanks for your time.

> Best regards,
> Łukasz Majewski
>
>>
>> Thanks,
>> Pankaj Dubey
>>> Lukasz,
>>> Your review or ack would be appreciated.
>>>
>>>
>>>> ---
>>>>   .../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi   |   25
>>>> +++++++++ .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi |
>>>> 55 ++++++++++++++++++++
>>>> arch/arm64/boot/dts/exynos/exynos7.dtsi            |   20 +++++++
>>>> 3 files changed, 100 insertions(+) create mode 100644
>>>> arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi create
>>>> mode 100644 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>>>>
>>>> diff --git
>>>> a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
>>>> b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi new file
>>>> mode 100644 index 0000000..1d6dcf2 --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
>>>> @@ -0,0 +1,25 @@
>>>> +/*
>>>> + * Device tree sources for Exynos7 TMU sensor configuration
>>>> + *
>>>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>>>> + *		http://www.samsung.com
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or
>>>> modify
>>>> + * it under the terms of the GNU General Public License version 2
>>>> as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <dt-bindings/thermal/thermal_exynos.h>
>>>> +
>>>> +#thermal-sensor-cells = <0>;
>>>> +samsung,tmu_gain = <9>;
>>>> +samsung,tmu_reference_voltage = <17>;
>>>> +samsung,tmu_noise_cancel_mode = <4>;
>>>> +samsung,tmu_efuse_value = <75>;
>>>> +samsung,tmu_min_efuse_value = <15>;
>>>> +samsung,tmu_max_efuse_value = <100>;
>>>> +samsung,tmu_first_point_trim = <25>;
>>>> +samsung,tmu_second_point_trim = <85>;
>>>> +samsung,tmu_default_temp_offset = <50>;
>>>> +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>>>> b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi new file
>>>> mode 100644 index 0000000..3970545
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>>>> @@ -0,0 +1,55 @@
>>>> +/*
>>>> + * Device tree sources for default Exynos7 thermal zone definition
>>>> + *
>>>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>>>> + *		http://www.samsung.com
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or
>>>> modify
>>>> + * it under the terms of the GNU General Public License version 2
>>>> as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +trips {
>>>> +	cpu-alert-0 {
>>>> +		temperature = <75000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-1 {
>>>> +		temperature = <80000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-2 {
>>>> +		temperature = <85000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-3 {
>>>> +		temperature = <90000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-4 {
>>>> +		temperature = <95000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-5 {
>>>> +		temperature = <100000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	cpu-alert-6 {
>>>> +		temperature = <110000>; /* millicelsius */
>>>> +		hysteresis = <10000>; /* millicelsius */
>>>> +		type = "passive";
>>>> +	};
>>>> +	/* HW Trip point */
>>>
>>> The comment looks unnecessary, all of these are HW trip points,
>>> right?
>>>
>>>> +	cpu-crit-0 {
>>>> +		temperature = <115000>; /* millicelsius */
>>>> +		hysteresis = <0>; /* millicelsius */
>>>> +		type = "critical";
>>>> +	};
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi
>>>> b/arch/arm64/boot/dts/exynos/exynos7.dtsi index c662f98..fc9d130
>>>> 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
>>>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>>>> @@ -27,6 +27,7 @@
>>>>   		pinctrl6 = &pinctrl_fsys0;
>>>>   		pinctrl7 = &pinctrl_fsys1;
>>>>   		pinctrl8 = &pinctrl_bus1;
>>>> +		tmuctrl0 = &tmuctrl_0;
>>>
>>> Why the alias is needed?
>>>
>>>>   	};
>>>>
>>>>   	cpus {
>>>> @@ -538,6 +539,25 @@
>>>>   			clocks = <&clock_peric0 PCLK_PWM>;
>>>>   			clock-names = "timers";
>>>>   		};
>>>> +
>>>> +		tmuctrl_0: tmu at 10060000 {
>>>> +			compatible = "samsung,exynos7-tmu";
>>>> +			reg = <0x10060000 0x200>;
>>>> +			interrupts = <0 108 0>;
>>>> +			clocks = <&clock_peris PCLK_TMU>,
>>>> +				 <&clock_peris SCLK_TMU>;
>>>> +			clock-names = "tmu_apbif", "tmu_sclk";
>>>> +			#include "exynos7-tmu-sensor-conf.dtsi"
>>>> +		};
>>>> +
>>>> +		thermal-zones {
>>>> +			atlas_thermal: atlas-thermal {
>>>
>>> The atlas is a Exynos7 specific codename. The name of node should
>>> be a general class of the device, so maybe:
>>> 	atlas_thermal: cluster0-thermal
>>> ?
>>>
>>> Best regards,
>>> Krzysztof
>>>
>
>
>