[PATCH] arm64: dts: Add tmu node for exynos7

[Krzysztof Kozlowski]

On 25.02.2016 12:27, Pankaj Dubey wrote:
> From: Alim Akhtar <alim.akhtar at samsung.com>
> 
> This patch adds tmu node, related temprature sensor and triping
> point data for Atlas cpu core found on exynos7 SoC.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>

Yours Sob is missing.

Cc-ed Lukasz Majewski.

Lukasz,
Your review or ack would be appreciated.


> ---
>  .../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi   |   25 +++++++++
>  .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi |   55 ++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi            |   20 +++++++
>  3 files changed, 100 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> new file mode 100644
> index 0000000..1d6dcf2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> @@ -0,0 +1,25 @@
> +/*
> + * Device tree sources for Exynos7 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <9>;
> +samsung,tmu_reference_voltage = <17>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <15>;
> +samsung,tmu_max_efuse_value = <100>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> new file mode 100644
> index 0000000..3970545
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> @@ -0,0 +1,55 @@
> +/*
> + * Device tree sources for default Exynos7 thermal zone definition
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +trips {
> +	cpu-alert-0 {
> +		temperature = <75000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-1 {
> +		temperature = <80000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-2 {
> +		temperature = <85000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-3 {
> +		temperature = <90000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-4 {
> +		temperature = <95000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-5 {
> +		temperature = <100000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	cpu-alert-6 {
> +		temperature = <110000>; /* millicelsius */
> +		hysteresis = <10000>; /* millicelsius */
> +		type = "passive";
> +	};
> +	/* HW Trip point */

The comment looks unnecessary, all of these are HW trip points, right?

> +	cpu-crit-0 {
> +		temperature = <115000>; /* millicelsius */
> +		hysteresis = <0>; /* millicelsius */
> +		type = "critical";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c662f98..fc9d130 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -27,6 +27,7 @@
>  		pinctrl6 = &pinctrl_fsys0;
>  		pinctrl7 = &pinctrl_fsys1;
>  		pinctrl8 = &pinctrl_bus1;
> +		tmuctrl0 = &tmuctrl_0;

Why the alias is needed?

>  	};
>  
>  	cpus {
> @@ -538,6 +539,25 @@
>  			clocks = <&clock_peric0 PCLK_PWM>;
>  			clock-names = "timers";
>  		};
> +
> +		tmuctrl_0: tmu at 10060000 {
> +			compatible = "samsung,exynos7-tmu";
> +			reg = <0x10060000 0x200>;
> +			interrupts = <0 108 0>;
> +			clocks = <&clock_peris PCLK_TMU>,
> +				 <&clock_peris SCLK_TMU>;
> +			clock-names = "tmu_apbif", "tmu_sclk";
> +			#include "exynos7-tmu-sensor-conf.dtsi"
> +		};
> +
> +		thermal-zones {
> +			atlas_thermal: atlas-thermal {

The atlas is a Exynos7 specific codename. The name of node should be a
general class of the device, so maybe:
	atlas_thermal: cluster0-thermal
?

Best regards,
Krzysztof