[PATCH v5 0/8] Add MT8173 Video Encoder Driver and VPU Driver

tiffany lin tiffany.lin at mediatek.com
Wed Feb 24 00:23:43 PST 2016


Hi Hans,

On Tue, 2016-02-23 at 09:47 +0100, Hans Verkuil wrote:
> On 02/23/16 09:11, Tiffany Lin wrote:
> > ==============
> >  Introduction
> > ==============
> > 
> > The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
> > Mediatek Video Codec is able to handle video encoding of in a range of formats.
> > 
> > This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load,
> > communicate with VPU.
> > 
> > Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI.
> > MTK IOMMU[1] and MTK SMI[2] have not yet been merged, but we wanted to start discussion about the driver
> > earlier so it could be merged sooner.
> > 
> > [1]https://patchwork.kernel.org/patch/8335461/
> > [2]https://patchwork.kernel.org/patch/7596181/
> 
> <snip>
> 
> > v4l2-compliance test output:
> > localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
> > Driver Info:
> >         Driver name   : mtk-vcodec-enc
> >         Card type     : platform:mt8173
> >         Bus info      : platform:mt8173
> >         Driver version: 4.4.0
> >         Capabilities  : 0x84204000
> >                 Video Memory-to-Memory Multiplanar
> >                 Streaming
> >                 Extended Pix Format
> >                 Device Capabilities
> >         Device Caps   : 0x04204000
> >                 Video Memory-to-Memory Multiplanar
> >                 Streaming
> >                 Extended Pix Format
> > 
> > Compliance test for device /dev/video1 (not using libv4l2):
> > 
> > Required ioctls:
> >         test VIDIOC_QUERYCAP: OK
> > 
> > Allow for multiple opens:
> >         test second video open: OK
> >         test VIDIOC_QUERYCAP: OK
> >         test VIDIOC_G/S_PRIORITY: OK
> > 
> > Debug ioctls:
> >         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >         test VIDIOC_LOG_STATUS: OK (Not Supported)
> > 
> > Input ioctls:
> >         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >         test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >         Inputs: 0 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> >         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >         Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> >         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >         test VIDIOC_G/S_EDID: OK (Not Supported)
> > 
> >         Control ioctls:
> >                 test VIDIOC_QUERYCTRL/MENU: OK
> >                 test VIDIOC_G/S_CTRL: OK
> >                 test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> >                 test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> >                 test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >                 Standard Controls: 12 Private Controls: 0
> > 
> >         Format ioctls:
> >                 test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >                 test VIDIOC_G/S_PARM: OK
> >                 test VIDIOC_G_FBUF: OK (Not Supported)
> >                 test VIDIOC_G_FMT: OK
> >                 test VIDIOC_TRY_FMT: OK
> >                 test VIDIOC_S_FMT: OK
> >                 test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 
> >         Codec ioctls:
> >                 test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >                 test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >                 test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> >         Buffer ioctls:
> >                 test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> >                 test VIDIOC_EXPBUF: OK
> > 
> > Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
> 
> Nice!
> 
> Can you try 'v4l2-compliance -s'? Note that this may not work since I know
> that v4l2-compliance doesn't work all that well with codecs, but I am
> curious what the output is when you try streaming.
> 
> Don't bother trying to chase down reported failures, those are likely from
> v4l2-compliance itself. It is something I would like to improve, but -ENOTIME.
> 

When I try to run 'v4l2-compliance -d /dev/video1 -s, I got follow
output.
I use v4.4-rc5 kernel and v4l-utils 1.6 version.

Streaming ioctls:
        test read/write: OK (Not Supported)
fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(332): buf.querybuf(node, i) fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(868): testQueryBuf(node, cur_fmt.type, q.g_buffers())
        test MMAP: FAIL
fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(923): ret && ret != ENOTTY

fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(988): setupUserPtr(node, q)
        test USERPTR: FAIL
        test DMABUF: Cannot test, specify --expbuf-device

best regards,
Tiffany

> Regards,
> 
> 	Hans





More information about the linux-arm-kernel mailing list