[PATCH RESEND 2/2] usb: dwc2: Move host-specific core functions into hcd.c

Doug Anderson dianders at chromium.org
Tue Feb 23 16:22:16 PST 2016


John,

On Tue, Feb 23, 2016 at 1:33 PM, John Youn <johnyoun at synopsys.com> wrote:

> +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)

You seem to have lost the function comments for
dwc2_calc_frame_interval().  Was that intentional?  If not, can you
add them back?


> +/**
> + * dwc2_hc_do_ping() - Starts a PING transfer
> + *
> + * @hsotg: Programming view of DWC_otg controller
> + * @chan:  Information needed to initialize the host channel
> + *
> + * This function should only be called in Slave mode. The Do Ping bit is set in
> + * the HCTSIZ register, then the channel is enabled.
> + */
> +void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)

Presumably can be static?  ...and remove prototype from "core.h"?


> +/**
> + * dwc2_core_init() - Initializes the DWC_otg controller registers and
> + * prepares the core for device mode or host mode operation
> + *
> + * @hsotg:         Programming view of the DWC_otg controller
> + * @initial_setup: If true then this is the first init for this instance.
> + */
> +int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)

Presumably can be static?  ...and remove prototype from "core.h"?


> +/**
> + * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
> + * Host mode
> + *
> + * @hsotg: Programming view of DWC_otg controller
> + *
> + * This function flushes the Tx and Rx FIFOs and flushes any entries in the
> + * request queues. Host channels are reset to ensure that they are ready for
> + * performing transfers.
> + */
> +void dwc2_core_host_init(struct dwc2_hsotg *hsotg)

Presumably can be static?  ...and remove prototype from "core.h"?


Other than those nits, things look good.  I didn't analyze exactly
where you placed all the functions but a quick glance shows that they
seem sanely organized.  :)

I picked these back to my chromeos-3.14 kernel (with many many dwc2
backports) and I confirmed that I can still compile the kernel, boot
it, and use USB.  I also confirmed no warnings were introduced for me.
I'm only testing HOST, not gadget mode.

Feel free to add my Reviewed-by and Tested-by once nits are fixed up.

-Doug



More information about the linux-arm-kernel mailing list